LG 32LX4DC Owner's Manual page 22

Insta_tion
1. To get the best picture quality; adjust the PC graph-
ics card to 1024x76& 60Hz_
2, If the graphic card on the PC does not output ana_
log and digital RGB simultaneously, connect onty
one of either PC INPUT or DVI INPUT to display
the PC on the TV,
If the graphic card on the PC does output analog
and digitat RGB simultaneously, set the TV to
either RGB or DV]; (the other mode is set to Plug
and Play automaticaJly by the T\,L)
3. if using a sound card, adjust the PC sound as
required
4. Check the image on your TVl There may be noise
associated with the resolution, verticat pattern,
contrast or brightness in PC mode. If noise is pre-
sent change the PC mode to another resolution,
change the refresh rate to another rate or adjust
the brightness and contrast on the menu until the
picture is clear, tf the refresh rate of the PC graphic
card can not be changed, change the PC graphic
card or consult the manufacturer of the PC graphic
card.
5. Avoid keeping a fixed image on the TV's screen for
a long period of time, The fixed image may become
permanently imprinted on the screen.
6, The synchronization input form for Horizontal and
Vertical frequencies is separate.
Monitor Display Specifications (RGB1-PC / DVI-PC Mode)
Resolution
64Ox350
640x480
800x6_
Horizontal Frequency
(kHz) (Hz)
31.468 70.09
31.469 59..94
37.861 72.80
37.500 75.00
35.156 56.25
37_879 60_31
48.077 72.18
46.875 75.00
48.363 60,00
1024x768
Connect the power cord as shown.
56.476 70.06
60.023 75.02
22