Rangecontrol - Kenmore 46745 Use & Care Manual

RANGECONTROL
PROGRAM CLOCK /
CANCELS BAKE, STATUS TIMER
BROIL OR DISPLAY DISPLAY
CLEAN OPERATION _ 1
TEMPERATURE
DISPLAY
FUNCTION
DISPI.AY
UP ARROW PAD
(INCREASESTIME
OR TEMPERATURE)
PRESSTO TURN
_MER ON AND OFF
SET AUTOMA_C
OVEN OPERA_ONS
DOWN ARROW PAD
(DECREASES TIME
OR TEMPERATURE)
Your range Is controlled with a touch, You now have the
ease of setting the following operations:
CLOCK TIMER
BAKE DELAY BAKE
BROHL CLEAN
DELAY CLEAN
The UP or DOWN arrow is used to set an amount of time
or change the temperature you want to use. By pressing
and holding down either pad the numbering will change
quickly. By pressing and releasing either pad the
numbering will change slowly.
D;$PLAY:
Once you have programmed your control for any
operation, you can display the setting by pressing the
appropriate pad. For example, if you _re using the
TI_'_ER and want to see the time of day, press CLOCt_..
'The display will show the time of day.
TOHE$:
The end-of-cycle tone will sound at the end of timer use
and automatic oven functions. The end-of-cycletone is
3 short beeps followed by 1 beep every 6 seconds that
repeat until you press any pad except the UP or DOW'N
arrow key. If you would like to eliminate the repeating
beeps, push and hold CLEAR/OFF for ten seconds. To
return the 1 beep every 6 seconds, push and hold
CILEAFJGFF for 10 seconds.
FoCODE:
tf the time display beeps continuously and flashes an
"F" followed by a number, you have a function error
code. Note the number after the "F". Press CLEAR!
OFF. Allow oven to cool for I hour. if problem repeats,
disconnect all power to the range and call for service.
Advise your service technician of the number following
the "F" in the display.
PRESS
NOTE: You cannot set BAIZE, BROHL or COOK
TiME while the oven door is in the locked
position, _f you _ry, the word"DOOR" will
appear in the display, The oven door
lock is to be used for Self-Cleaning only,
9 NCERC18-3