Motion Detection - Samsung SNB-7001 User Manual

setup screen

Motion detection

1. From the Setup menu, select the
<Event (
2. Click <Event setup >.
3. Select <Motion detection> from
<Event action setup>.
❖ Motion Detection
1. Set whether or not to <Enable>.
2. Set the motion detection mode to
Mask.
• Detect : Detect a motion that may
occur in the selected area.
• Mask : Detect a motion that may
occur in other areas than the
selected.
3. Select the detection sensitivity of a
moving object.

Set to a lower sensitivity in environments
that allow clear distinguishing of objects
from background. Set to a higher sensitivity
otherwise, such as in a dark place.
4. Use the drag-and-drop method to specify the detection area on the video.
• Mask mode : Display the set area.
• Minimum object size : Set the minimum area for a recognizable object.
Motion detection will not be activated for an area that is smaller than the minimum
size of object.
• Maximum object size : Set the maximum area for a recognizable object.
• [Clear (
5. Specify the use of overlay.
- Select <Display event area> to mark a box on the detected moving object on the
screen.
6. Specify the activation time and activation condition.

For more information about <Activation time> and <Action>, refer to "Alarm input". (page 57)
7. When done, click [Apply (
60_ setup screen
)> tab.
)] : Cancel the set area.
)].