Adding The Water & Coffee - Cuisinart Brew Central DCC2400U User Manual

Table of Contents

Advertisement

N.B. We strongly recommended that the water fi lter is replaced after 90 days or 90 uses; more often if you
have hard water. Failure to do so can lead to a build-up of limescale and affect the performance of your ap-
pliance. Replacement fi lters can be purchased directly from the manufacturer, (refer to UK After Sales
section for further details).
B
Adding the Water and Ground Coffee
Before making coffee for the fi rst time, we recommend operating the appliance once, using only water, to
remove any dust or residue that may remain in the system from the manufacturing process.
1. Fill the water reservoir
ß Open the lid of the Brew Central, the water reservoir is located at the back right of the machine.
ß Pour the desired amount of fresh cold water into the reservoir using the step water level indicator, located
at the rear of the reservoir.
2. Add the ground coffee
ß Remove the fi lter basket from the fi lter chamber by grasping the handle and lifting straight up, and then
place it on the work surface.
ß Insert a suitable paper fi lter if required ensuring it is completely open and fully inserted in the basket. Or
simply use the permanent gold tone fi lter.
ß Add the desired amount of ground coffee, corresponding to the number of cups being brewed. We recom-
mend using 1 level scoop of ground coffee per cup, but use more or less to suit your taste. Always ensure the
coffee used is ground to the correct consistency for a fi lter coffee machine, otherwise the machine may fl ood.
N.B. The maximum capacity for ground coffee is 17 tablespoons for this coffee maker. Exceeding this
amount may damage the appliance.
12

Advertisement

Table of Contents
loading

Table of Contents