Searching For Access Points - Canon VIXIA mini Instruction Manual

Wireless Connections Using an Access Point
■

Searching for Access Points

After you touch [Search for Access Points], the camcorder will
take a few seconds to detect access points available in the
vicinity and will display the first one. Make a note in advance of
the network name (SSID) and password (encryption key) of the
access point you want to use. (This will usually be the wireless
router on your home network.)
To enter text for the various settings, use the virtual keyboard
(A 170).
1
Select the desired access point.
• If the desired access point is not displayed, you can touch
[Í] or [Î] to go through the list of detected access
points. You can also touch [Search Again] to have the
camcorder search for access points again.
• When the network name (SSID) of the desired access
point appears, touch [OK].
2
To enter the [Encryption Key] field, touch [Not config-
ured]. Enter the access point's password (encryption
key) and touch [OK].
• If the access point selected in step 1 did not have a [C]
icon, this step is not necessary.
168