Kenmore 721.24195 Owner's Manual page 5

Before assembling your vacuum cleaner, be
sure you have all the parts shown in PARTS
AND FEATURES.
TELESCOPIC WAND
Hold spring latch
and pull out or push
in wand to
required length.
'_ Spring Latch
AIR-TURBINE BRUSH NOZZLE
1. Insert wands
into the Air- X
Turbine Brush
Nozzle until the
wand button
snaps into place
in the hole of _ #
the tool.
2. Slide the Pile Adjustment to the right for long
pile and to the left for short pile.
,_Pile Adjustment 1 I
Long Pile Short Pile
ATTACHMENTS
Open the accessory cover and pull out
accessory you want.
For proper use of accessory and best cleaning
results, see ATTACHMENT USE CHART.
CANISTER
1. Open the canister hood.
2. Check to see that the dust bag is properly
installed.See CHANGING THE DUST BAG
for instructions.
3. Check to see that the motor safety filter is
properly installed. See CLEANING
MOTOR SAFETY FILTER for instructions.
MotorSatety /_ _ _
Filter
HOSE
Fitting Hook
1. Insert hose into canister until it snaps into
place.
To remove hose: Push hose fitting hook
down and pull out.
2. Insert wand into handle until lock button
snaps into place.
To remove handle: Press lock button in
and pull up on handle.
Handle
Lock Button
-5-