Changing Color Panels - Sears Kenmore 587.14249 Owner's Manual

Changing Color Panels
mnstalling Reversible Door and Access Panels
Some models are equipped with reversible door and access panel inserts that offer three decorative colors,
Electrical Shock Hazard
Tc_prevent electrical shock,
disconnect electrical power supply
to dishwasher before changing
panel,
Cut Hazard
Metal door panels are sharp
and shouid be handled with
care. Wear gloves to protect
hands.
Failure to do so can result in
injury.
To change exposed
co!orpane!:"
1. Remove trim strip from one side of the door panel. Loosen but do not remove screws from trim strip on
remaining side.
2. Remove trim strip from one side of access panel. Loosen but
do
not remove screws from trim
strip on
remaining side,
3 Slide insert panels out of frame, Position color panel of choice to outside and replace panel in frame,
4, Be sure edges of insert panels are under trim strips on opposite side. Press strips tightly against panels
before securing screws, Replace trim strips,
Trim Strips
Loosen all
screws
Loosen all
screws
Enstaiii_g a Wood Panel Trim Kit
A panel of up to 3/16 " thickness may be used in
place of the aluminum insert panels furnished
with your dishwasher, "You will need a wood
decorator trim Idt which is availabIe at Sears
Service Center- Part Nor 5303293778
Note: Door springs will need to be adjusted to
balance weight of panels, See the Installation
Instru cti ons,
I2
Insert Door Panel
Loosen all
screws
Door and Access Panel Dimensions
Door' Panel: 17 7/26" x I7 5I_6"
Access Panel: 17 7/16" x 6 1/2"