Placement Of The Switch - Belkin 16-Port Gigabit Switch User Manual

Placement of the Switch

The Switches can be placed on a flat surface or in a 19-inch rack.
Placement on a Flat Surface
1.
Affix the four included rubber feet on the bottom of the Switch in
the area that is clearly marked on each of the four corners.
2.
Make sure the Switch is placed in an area that allows for
proper ventilation.
3.
Place on a flat surface.
Placement in a 19-Inch Rack
1.
Do not affix the four rubber feet on the Switch when
rack-mounting. If already affixed, remove.
2.
Attach the mounting bracket to each side of the Switch with
the included screws.
3.
Place the Switch in the rack and align the holes of the mounting
bracket with the correct hole in the rack.
4.
Place and tighten the screws of each mounting bracket into
the rack.
7 7
1
2
3
4
5
6
7
8