OneRemote RMB4 User Manual page 12

The Beo4 VMEM / VTAPE button option
On your OneRemote modified Beo4 remote control, the VMEM button can be pro-
grammed, to open a specific source on your non B&O TV.
VMEM/ VTAPE options
Enter one of these codes within 10 seconds, to select the source on the non B&O TV that will be selected
with the VMEM or VTAPE button.
LIGHT
mT01p
LIGHT
mT11p
LIGHT
mT21p
LIGHT
mT31p
LIGHT
mT41p
LIGHT
mT51p
LIGHT
mT61p
LIGHT
mT71p
LIGHT
mT81p
LIGHT
mT91p
As the OneRemote controller is able to operate many different TV models, there might be some sources in the
table, that is not available on your TV. The only way to find out if your TV accepts these codes, is testing
each of the options.
If a source is not access able using these options, sources must be accessed the same way as using the TVs
original remote control. Using the source button.
No new source selected.
The AV1 socket on the TV is opened.
The AV2 socket on the TV is opened.
The DTV tuner on the TV is opened.
The Component 1 socket is shifted to.
The Component 1 socket is accessed.
The HDMI 1 socket is accessed.
The HDMI 2 socket is accessed.
S-VHS 1
USB Wiselink
12