AA/AAA Charger Ni-MH
Thank you for purchasing this SANYO product. Please
read and understand these instructions carefully to ensure
safe and satisfactory operation. Keep these instructions
handy for future reference.
Sanyo Model No.
NC-MQN04E / NC-MQN04B
ON - charging
OFF - Timer off (approx. 16hours)
eneloop Ni-MH AA (typ. 2000mAh) 10(h)
eneloop Ni-MH AAA (typ. 800mAh) 8(h)
Ni-MH AA (typ. 2700mAh)
Ni-MH AA (typ. 2500mAh)
Ni-MH AA (typ. 1700mAh)
Ni-MH AAA (typ. 1000mAh)
Ni-MH AAA (typ. 900mAh)
Dimensions (L x W x H)
* The above charging times are estimated hours to
complete charging. The LED Indicator remains lit
even after these charging times have elapsed. A
protection timer switches the LED off after approx
16hrs of continuous charging in an electrical outlet.
• Exclusively for use with SANYO NiMh (Nickel Metal
Hydride) AA and AAA (HR-3U & HR-4U) sized
• AA & AAA mixed batteries cannot be charged together in
one channel and single batteries cannot be charged in
HOW TO INSERT THE BATTERIES
Please charge 2 to 4 batteries simultaneously.
250mA x 2(AA)
120mA x 2(AAA)
AA and AAA type batteries cannot be charged by two
slots of one side of a charger together. A battery cannot
be charged also when it is set by only one battery
118 x 75 x 40 mm
approx. 230 g.
LED (charger indicator light)