Event Record Duration - Samsung SDE-500X User Manual

Recording Color Tags
Color
White
Orange
Blue
Green
Each press of a selected cell will cycle through <No Recording>-<Continuous>-<Event>-
<Both(Cont&Evnt)>.

Event Record Duration

You can set the beginning and ending point of a recording on an event.
Using the mouse may help make setup easier.
1. Use the up/down buttons ( ) in <Record> window to
move to <Event Record Duration>, and press [ENTER]
button.
2. Use direction buttons ( ◄ ►) to move to a desired
item, and set the value.
• Pre Event : The recording of an event will start at a
pre-determined time prior to the actual occurrence of the event.
If it is set to 5 seconds, the recording begins from 5
seconds before the event.
• POST Event : The recording will continue for a
pre-determined time after the actual end of an event.
If it is set to 5 seconds, the recording ends in 5 seconds after an event.
3. When the event recording duration setup is done, press <OK>.
Function
No Recording No schedule / event recording
Continuous Scheduled recording only
Event Event recording only
Both(Cont&Evnt) Both scheduled / event recordings
Description
Event Record Duration
Pre Event  POST Event 
CH

1 OFF

2 OFF

3 OFF

4 OFF

5 OFF

6 OFF

7 OFF

8 OFF
Previous/Next Page
OK Cancel

1 min

1 min

1 min

1 min

1 min

1 min

1 min

1 min
English _67