Water Filter Status Light - Maytag MSD2559XEM Service Update Information

KitchenAid Stealth Control Overview and
Programming Instructions (continued)
ICE MODE

Water Filter Status Light:

Water Filter Status Light:
The water filter status light will help you know when to change your water filter.
The water filter status light will help you know when to change your water filter.
When the dispenser control panel's water filter status display changes to "ORDER,"
When the dispenser control panel's water lter status display changes to "ORDER," this tells you
this tells you that it is almost time to change the water filter cartridge.
that it is almost time to change the water filter cartridge.
Replace the water filter cartridge when the water filter status display changes to
Replace the water lter cartridge when the water lter status display changes to "REPLACE." The
"REPLACE." The filter should be replaced at least every 6 months, depending on your
filter should be replaced at least every 6 months, depending on your water quality and usage.
Note: If water flow to your water dispenser or ice maker decreases noticeably, change the filter
water quality and usage.
sooner.
decreases noticeably, change the filter sooner.
After changing the water filter, reset the status light.
After changing the water filter, reset the status light.
Details:
Details:
Pressing and holding RESET FILTER starts the 3,2,1 second countdown. Using the dispenser
cancels the countdown AND no dispensing is permitted. The number '3' blinks 3 times and the
Pressing and holding RESET FILTER starts the 3 second countdown. Using the dis-
'invalid' tone sounds 3 times and user has to release both the pad and the button and press the
penser cancels the countdown and no dispensing is permitted. The number '3' blinks
button again to start it over
3 times and the 'invalid' tone sounds 3 times and user has to release both the pad
After 3 seconds, the BLUE WATER BARS in the Icon flash and an audible tone sounds three times.
and the button and press the button again to start it over
When the system is reset, the "ORDER" and "REPLACE" icons will disappear from the display
After 3 seconds, the BLUE WATER BARS in the Icon flash and an audible tone will
screen. See figure 16.
Note: Users can reset the filter status at any stage.
not sound three times. When the system is reset, the "ORDER" and "REPLACE"
icons will disappear from the display screen. See figure 16.
Note: Users can reset the filter status at any stage.
*Always refer to Service Sheet and Use and Care Manual for information specific to the refrigerator you are servicing.
LIGHT TEMPERATURE
Hold 3 Sec.
Figure 16
Note: If water flow to your water dispenser or ice maker
29
Order
Replace
MAX ICE LOCK RESET FILTER
Hold 3 Sec. Hold 3 Sec.