Storing Channels In Memory - JVC KD-R810 Instructions Manual

Activate your SIRIUS subscription after
connection
1
] "SIRIUS"
SIRIUS Satellite radio starts updating all
the SIRIUS channels. Once completed,
SIRIUS Satellite radio tunes in to the
preset channel, CH184.
2
Check your SIRIUS ID. (
3 Contact SIRIUS on the internet at
<http://activate.siriusradio.com/> to
activate your subscription, or you can
call SIRIUS toll-free at 1-888-539-SIRIUS
(7474).
• "Sub Updated Press Any Key" scrolls on
the display once subscription has been
completed.
Activate your XM subscription after
connection
• Only Channel 0, 1, and 247 are available
before activation.
1
] "XM"
XMDirect ™ Tuner Box or XMDirect2
Tuner System starts updating all the
XM channels. "Channel 1" is tuned in
automatically.
2 Check your XM Satellite radio ID labelled
on the casing of the XMDirect™ Tuner
Box or XMDirect2 Tuner System, or tune
in to "Channel 0". (
3
Contact XM Satellite radio on the internet
at <http://xmradio.com/activation/> to
activate your subscription, or you can call
1-800-XM-RADIO (1-800-967-2346).
• Once completed, the unit tunes in to
one of the available channels (Channel
4 or higher).
32)
right column)
Checking the satellite radio ID
While selecting "SIRIUS" or "XM"...
] Select "Channel 0."
SIRIUS: SIRIUS identification number is
displayed after "Channel 0" is selected.
XM: The display alternately shows "RADIO ID"
and the 8-digit (alphanumeric) ID number.
To cancel the ID number display, select any
channel other than "Channel 0."

Storing channels in memory

You can preset up to 18 channels for both
SIRIUS and XM.
Ex.: Storing channel into preset number "04."
1 Tune in to a channel you want to store.
(Steps ~ – !,
2
[Hold]
] Shows the "Preset Mode" screen.
3
] Selects preset number "4."
22.)
ENGLISH 23