Movie Edit - FujiFilm FINEPIX S8000W Series Owner's Manual

<A< r _ t/'mA// n_< Pkyb<<:k i_/Iod<_
[] MOVIE EDIT
Edit movies.
• MOVIE TRIMMING
Remove opening or ending footage to create an
edited copy of the current movie.
1 Display the desired movie.
2 Select [] MOVIE EDIT in the playback menu,
then select MOVIE TRIMMING. To remove
footage from the start of the copy, proceed to
Step 3; otherwise, proceed to Step 4.
3 Pressthe selector down to begin playback and
press it down again when the new opening
frame is reached.
4 Press MENU/OKTo remove footage from the
end of the copy, proceed to Step 5; otherwise,
proceed to Step 6.
5 Press the selector down to begin playback
and press it down again when the new closing
frame is reached.
6
PressMENU/OK to save the copy.
• MOVIE J OIN
Add existing footage to the end of the current
movie to create an edited copy.
1 Display the desired movie.
2 Select [] MOVIE EDIT in the playback menu,
then select MOVIE JOIN.
3
Press the selector left or right to highlight a
movie.
4 Press MENU/OK to add the highlighted footage
to the end of the current movie and save the
resulting copy, or press DISP/BACK t o exit with-
out creating a copy.
Both movies must [lave been recorded at the same
frame sizeand frame rate.