Asus CUV4X-C PC133 User Manual page 35

3. HARDWARE SETUP
8) Standard Infrared Module Connector (5-pin IR)
This connector supports an optional wireless transmitting and receiving infrared
module. This module mounts to a small opening on system cases that support
this feature. You must also configure the setting through UART2 Use Infrared
(see 4.4.2 I/O Device Configuration) to select whether UART2 is directed for
use with COM2 or IrDA. Use the five pins as shown in Back View and connect
a ribbon cable from the module to the motherboard SIR connector according to
the pin definitions.
CUV4X-C
®
CUV4X-C Infrared Module Connector
9) Power Supply Thermal Sensor Connector (2-pin block JTPWR)
If you have a power supply with thermal monitoring, connect its thermal sensor
cable to this connector.
CUV4X-C
®
CUV4X-C Thermal Sensor Connector
ASUS CUV4X-C User's Manual
Front View
IR
1
JTPWR
Power Supply
Thermal Sensor
Back View
+5V
IRTX
(NC)
GND
IRRX
35