Table of Contents
Advertisement
RPS
6.4
Recover Old Database Files
NOTICE!
You cannot point RPS to a database created in an older version of RPS. Doing so either
produces errors, or it corrupts the database.
To recover control panel accounts that were not exported before installing the new version of
RPS:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. Verify that your accounts appear in the Panel List.
11. Export your accounts. Refer to Export in the RPS General Help File for more information.
12. Remove the old version of RPS, and then reinstall the new version.
13. Import your old accounts into the new version of RPS. Refer to Import in the RPS General
14. Verify that your old accounts now appear in the Panel List.
Bosch Security Systems, Inc.
Uninstall the new version of RPS. Refer to Section 6.2.4 Remove RPS on page 54.
Reinstall the old version of RPS (version 5.11 or earlier).
When the installation asks if you want to install a new database, click Yes.
When the installation is complete, restart your PC and then start RPS.
Select Config > System > File Locations.
Select the database file, and click Modify.
When the Modify Location dialog opens, browse to the folder named "database.000" in
the RPS directory. This is the folder where your old accounts were placed when you first
upgraded RPS.
Click OK and exit RPS.
Restart RPS.
Help File for more information.
Installation Guide
Maintenance | en
61
4998141259 | 12 | 2011.10
Advertisement
Table of Contents
