Table of Contents
Advertisement
RPS
4.2
Upgrade RPS with a Microsoft Access Database
4.2.1
Before You Upgrade RPS
NOTICE!
Use this procedure only if your RPS installation uses an Access database.
If you are upgrading an RPS installation that uses a SQL database, refer to Section 4.1 Upgrade
RPS with a SQL Database, page 33 for upgrade instructions.
NOTICE!
Before you upgrade RPS, back up your current RPS database and export a copy of it for
recovery purposes, if needed. If you use Unattended Mode, turn it off before you upgrade
RPS. Refer to the RPS Online Help for more information.
4.2.2
View the RPS Documentation and Start the Installation Process
1.
2.
3.
Bosch Security Systems, Inc.
Insert the RPS CD-ROM into your CD-ROM drive.
The RPS startup program should automatically start.
If the startup program does not automatically start:
a.
Select Start > Run...
b.
At the prompt, type: X:\setup.exe.
"X" = the drive letter assigned to your CD-ROM drive.
When the startup window opens, select a language from the list provided. An instruction
window opens in the selected language.
From the instruction window, you can open the RPS documentation and install RPS.
Installation Guide
Upgrade RPS | en
39
4998141259 | 12 | 2011.10
Advertisement
Table of Contents
