Sharp WX-T81 User Manual page 30

To Make a Conference Call
You must have one active call and one held call.
1.
During a call, press [Options] and select "Multi
Party".
2.
Select "Conference All" to join the conference call.
Press F to end the conference call.
3.
Note
• The conference call service may not be available on
all networks. Contact your network operator for
more information.
• You have more options for the Conference call in step
2:
• To put all participants on hold, select "Hold All".
• To put all participants except the current call on
hold, select "Private".
• To end the call with all participants, select "End
Active Call(s)" or "End Held Call(s)".
• To reject adding more participants to the current
party, press [Options] and select "Reject", or you
can forward the call to the Voice Mail centre by
selecting "Busy" or F.
To Add New Participants to the Conference Call
1.
Press [Options] and select "Dial New Number".
2.
Enter the number you wish to include in the
conference call and press D to dial.
3.
Press [Options] and select "Multi Party".
4.
Select "Conference All" to join the conference call.
If you wish to add other participants, repeat steps 1
to 4.
To End the Call with a Conference Call Participant
1.
During a conference call, highlight the person that
you wish to disconnect from the conference call.
2.
Press [Options] and select "End This Call".
To Have a Private Conversation with One of the
Participants
If you wish to have a private conversation with one of
the participants, you may select the participant from the
conference list and put the other participants on hold.
1.
During a conference call, select the person that you
wish to talk to.
2.
Press [Options] and select "Multi Party".
3.
Select "Private".
4.
Once you have finished the private conversation,
press [Options] and select "Multi Party".
Voice Call/Video Calling Functions 29