Introduction; Precautions - AND Density Determination Kit AD-1653 BM Series Instruction Manual

Thank you for purchasing the AD-1653 Density Determination Kit.
This manual describes how to use the AD-1653 Density Determination Kit.
The AD-1653, when combined with one of our electronic balances (BM series, GH series, HR-i series,
GR series, HR series and HA series), allows the density of a solid and liquid to be measured easily.
Before using the AD-1653, please read this manual thoroughly and keep it at hand for future reference.

1.1. Precautions

This density determination kit allows the density of a solid or liquid to be measured. However, the
results of measurements may be affected by various factors that could cause errors, and thus we
can not guarantee these results.
Do not use the density determination kit for measuring the density of chemically active substances.
After using the density determination kit, clean all surfaces to remove rust and oxides.
A balance is a precision instrument. Avoid shocks and excessive loads.
Maintain the air, sample and liquid at a constant temperature during the measurement.

INTRODUCTION

1.
2