Renault 2013 Clio Handbook page 46

CHILD SAFETY: choosing a child/baby seat mounting
2
The two rings 1 are located between
the seatback and the seat base of the
seat and are identified by a marking.
To ensure your child seat can be easily
fitted and locked on rings 1, use access
guides 2 on the child seat.
The ISOFIX anchorage points have been exclusively designed for child
seats with the ISOFIX system. Never fit a different type of child seat, seat
belt or other objects to these anchorage points.
Check that nothing is obstructing the anchorage points.
If your vehicle has been involved in a road accident, have the ISOFIX anchorage
points checked and replace your child seat.
1.40
1
5
The third ring is used to attach the
upper strap on some child seats:
(2/2)
3
4
– depending on the vehicle, unclip
mobile floor cover 6 then pass
through strap 3;
– hook 4 must be fitted to ring 5 or
to the ring located under cover 6
marked with
then be tightened.
In this case, the child seat may not
always rest on the base of the vehi-
cle seat.
6

. The strap must
Check that the seatback
of the forward-facing child
seat is in contact with the
back of the vehicle seat.