Renault 2013 Clio Handbook page 226

FITTING A RADIO
1
Radio location 1
Unclip the blanking cover. The aerial, +
and – supply and speaker wire connec-
tions are located behind it.
5.34
2
Door speakers
Using a flat-blade screwdriver or simi-
lar, unclip grille 2 to access the speaker
wires.
– In all cases, it is very important to
follow the manufacturer's instruc-
tions carefully.
– The specifications of the brack-
ets and wires (available from our
network) vary depending on the
equipment level of your vehicle
and the type of radio.
Consult an approved Dealer to
find out the correct part number.
– No work may be carried out on
the vehicle's electrical or radio
circuits, except by approved
dealers: an incorrectly connected
system may result in damage
being caused to the electrical
equipment and/or the compo-
nents connected to it.