Keyboard Commands (Pelco Protocol) - Bosch MIC612 Installation Manual

MIC612 Thermal Camera
Locked Function Command
Key No.
Set/Shot 102
Set/Shot 103
Set/Shot 104
Set/Shot 106
Set 110
A.2

Keyboard Commands (Pelco Protocol)

33 - Preset
34- Preset
80 - Preset
81 - Preset
82 - Preset
85 - Preset
86 - Preset
87 - Preset
88 - Preset
92 - Preset
93 - Preset
95 - Preset
96 - Preset
97 - Preset
98 - Preset
99 - Preset
0 - Pattern
1 - Pattern
Bosch Security Systems, Inc.
Command
Autopan Right Limit
Lock Commands
Unlock Commands
Pre-wash position
Factory P/T Home Position
Keyboard User Action
Command
PressPress
Press
Press
Press
Press
Press
Press
Press
Press
Press and hold (2 seconds) Sets the Left pan limit for an AutoScan with
Press and hold (2 seconds) Sets the Right pan limit for an AutoScan
Press
Press and hold (2 seconds) Invokes the Pelco main Setup Menu when
Press
Press
Press
Press and hold (2 seconds) After 2 minutes of applied power, command
Press
Press and hold (2 seconds) Initiates recording based upon current
Press
Press and hold (2 seconds) Initiate Recording A. Press ACK to end
Press
Installation Manual
Description
Set–Programs right limit.
Shot–Shows limit.
Locks commands.
Unlocks commands.
Sets the camera in pre-wash position.
Recalibrates home position.
Description
Pans the AutoDome 180° (Flip)
Goes to Zero Pan (original home position)
Toggles Synch. Mode between Line Lock
and Internal. No dependency on power on
time.
Initiates the AutoDome standard preset tour
(Tour 1)
Initiates the AutoDome custom preset tour
(Tour 2)
Select Black Hot thermal mode
Select White Hot thermal mode
Select Color 1 thermal mode
Select Rain thermal mode
Limit Stops enabled
with Limit Stops enabled
Enables or disables Limit Stops in the
Setup Menu for AutoScan.
pressed for 2 seconds.
Stops a scan
Initiates FastAddress process (Pelco
Random Scan)
Toggles the Synch. Mode between Line
Lock and Internal (Pelco Frame Scan).
Available only within 2 minutes after power
is applied.
reverts to normal preset functionality.
Initiates an AutoScan
Recording setting (A or B) in the Setup
Menu. Press ACK to end recording.
Initiates recording continuous playback
based upon current Recording setting (A or
B) in the Setup Menu.
recording.
Initiate Recording A continuous playback
| en 71
F.01U.249.416 | 2.0 | 2012.09