Alarm Setup - Bosch MIC612 Installation Manual

46 en | On-Screen Display (OSD) Menus (Bosch Protocol)
6.7

Alarm Setup

The Alarm Setup Menu contains alarm inputs, outputs and rules.
NOTICE!
The maximum number of Alarm Inputs is eight (8), available only on the Alarm and Washer
Pump Drive Card (MIC-ALM) (sold separately). Without the MIC-ALM installed in the MIC PSU,
only one alarm input is available. See Section 3.4 About Alarm Inputs and Outputs, page 16 for
the specific number of alarm Inputs and Outputs per PSU.
Exit...
Multi Alarm Setup
Inputs Setup...
Outputs Setup...
Rule Setup...
Restore Defaults...
Multi Alarm Setup
Allows setup of multiple alarms. Options: On; Off. Checkbox button to "Select". This option is
available for installations which include the MIC-ALM card in the MIC PSU.
Inputs Setup Submenu Choices:
Inputs Setup
Defines physical inputs or events and commands that can be used in a rule. There are twelve
(12) alarm inputs available.
Inputs 1-8
Defines the type of physical input (dry contact): N.O. (Normally Open) (default setting) or
N.C. (Normally closed).
Inputs 9-12
Defines input commands that can be used in a rule. Command inputs can also be customized
by using non-assigned keyboard command numbers.
Option
NONE
Aux On Responds to a standard or custom keyboard ON (1-99) command.
Aux Off Responds to a standard or custom keyboard OFF (1-99) command.
Shot
F.01U.249.416 | 2.0 | 2012.09
Alarm Setup
Focus / Iris: Select
Description
(Default setting) No command defined.
Responds to a Preset shot or scene from 1-99.
Installation Manual
Inputs Setup
Exit...
1. Alarm Input 1 N.O.
2. Alarm Input 2 N.O.
3. Alarm Input 3 N.O.
4. Alarm Input 4 N.O.
5. Alarm Input 5 N.O.
6. Alarm Input 6 N.O.
7. Alarm Input 7 N.O.
8. Alarm Input 8 N.O.
9. NONE
10. NONE
12. NONE
12. NONE
Focus / Iris: Select Type
Right / Left: Select Mode
MIC612 Thermal Camera
Bosch Security Systems, Inc.