Freezer Door; Hinge Cover - Frigidaire FFPT10F3NM Important Safety Instructions Manual

DOOR REVERSAL INSTRUCTIONS
Step 5
Remove right pin assemblies from the bottom of the
freezer and refrigerator doors. On the opposite side,
attach the replacement pin assemblies (located in
the plastic bag with the Use and Care Manual) with a
screwdriver. Note: You must re-use the screws from
the pin assemblies that are removed in this step when
attaching the new assemblies.
Freezer
Door
2
3
2
Step 6
Place the refrigerator door on the bottom left hinge.
Ensure the door is aligned horizontally and vertically.
Attach middle hinge to top (left) of refrigerator door,
attach shim to the back of hinge, align with holes and
affix to middle beam with reserved screws. Fasten with
screwdriver (not included).
6
Refrigerator
Door
2
3
3
Replace
Door
Step 7
Place the freezer door on the middle hinge. Ensure that
the door is aligned horizontally and vertically, and that the
gasket seals on all sides before attaching the top hinge.
Attach the top hinge and shim and replace the hinge cover
and top cap.

Hinge Cover

Top Hinge
Insert
Middle
Hinge
Center
Center
Hinge
Hinge
Shim
1
Top Hinge
Shim
Top Cap