Table of Contents
Advertisement
TO SELECT A DESIRED CHANNEL
You can select the desired channel by using the
CHANNEL K or L button on or directly pressing
the number buttons on the remote control.
Note for using the number buttons:
•
When selecting cable channels which are higher
than 99, press the +100 button first, then, press the
last two digits. (Example: to select channel 125,
first press the +100 button then press "2" and "5").
•
You must proceed single-digit channel numbers
with a zero (Example: 02 ... 09).
CLOCK SET UP
(AUTO / MANUAL)
The TV/VCR clock must be set correctly before
VCR timer recording is possible. It is suggested that
the clock be set manually when first setting up the
TV/VCR. Then, set to [ON] the auto clock setting
which will periodically correct the setting if neces-
sary.
NOTE: If you cannot receive a station with time sig-
nals, auto clock setting cannot be performed. Use
manual setting only.
MANUAL CLOCK SETTING
Make sure ...
•
The TV/VCR is turned on.
In the example below, the clock is to be set to:
DATE
May 6th, 2003
SETTING TIME
5:40PM
1
Select "SETTING CLOCK"
Press the MENU button on the
remote control.
Press the PLAY/K or STOP/L
button to point to "SETTING
CLOCK".
Then, press the F.FWD/B button.
2
Select "MANUAL CLOCK SET"
Press the PLAY/K or STOP/L
button to point to "MANUAL
CLOCK SET".
Then, press the F.FWD/B button.
3
Select the month
Press the PLAY/K or STOP/L
button until your desired month
appears. (Example: May → 05)
Then, press the F.FWD/B button.
4
Press the PLAY/K or STOP/L but-
ton until your desired day appears.
(Example: 6th → 06)
Then, press the F.FWD/B button.
5
Press the PLAY/K or STOP/L but-
ton until your desired year appears.
(Example: 2003)
Then, press the F.FWD/B button.
6
Press the PLAY/K or STOP/L but-
ton until your desired hour appears.
(Example: 5, PM)
Then, press the F.FWD/B button.
7
Press the PLAY/K or STOP/L but-
ton until the desired minute
appears. (Example: 40)
8
Press the MENU button on the
remote control.
Although seconds are not dis-
played, they begin counting from
00 when you press the MENU button on the remote
control. Use this feature to synchronize the clock
with the correct time.
– M E N U –
NOTE:
TIMER PROGRAMMING
PICTURE CONTROL
When unplugging the AC cord or if there is a power
B SETTING CLOCK
CHANNEL SET UP
USER'S SET UP
failure for more than 3 seconds, you may have to
V-CHIP SET UP
LANGUAGE [ENGLISH]
reset the clock.
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
TO CHANGE CLOCK SETTING
If you want to change the clock,
1)Follow steps [1] and [2].
– SETTING CLOCK –
2)Select where you want to change using the
AUTO CLOCK
[ON]
F.FWD/B or REW/s button.
AUTO CLOCK CH SEARCH
AUTO CLOCK CH
[ 02 ]
B MANUAL CLOCK SET
3)Enter correct numbers using the PLAY/K or
D.S.T.
[OFF]
STOP/L button.
4)Press the MENU button on the remote control to
start the clock.
– MANUAL CLOCK SET –
PLEASE NOTE:
MONTH DAY
YEAR
If there is no local PBS station in your area or on
0 5 / – –
– – – – – – –
your cable system, select "AUTO CLOCK" and
HOUR
MINUTE
press the F.FWD/B or REW/s button to turn [OFF]
– – : – –
– –
this function. Then you can manually adjust the
clock.
- 11 -
Select the day
Select the year
Select the hour
Select the minute
Start the clock
– MANUAL CLOCK SET –
MONTH DAY
YEAR
0 5 / 0 6
– – – – – – –
HOUR
MINUTE
– – : – –
– –
– MANUAL CLOCK SET –
MONTH DAY
YEAR
0 5 / 0 6
TUE
2 0 0 3
HOUR
MINUTE
– – : – –
– –
– MANUAL CLOCK SET –
MONTH DAY
YEAR
0 5 / 0 6
TUE
2 0 0 3
HOUR
MINUTE
0 5 : – –
PM
– MANUAL CLOCK SET –
MONTH DAY
YEAR
0 5 / 0 6
TUE
2 0 0 3
HOUR
MINUTE
0 5 : 4 0
PM
5:40 PM
EN
9I03
Advertisement
Table of Contents
