Acer ixtreme M5150 Service Manual page 90

CPU Installation Procedure
The following illustration shows CPU installation components.
1.
Install your CPU. Pull up the lever away from the
socket and lift up to 90-degree angle.
2.
Locate the CPU cut edge (the corner with the pin
hold noticeably missing). Align and insert the CPU
correctly.
3.
Press the lever down and apply thermal grease
on
top of the CPU.
4.
Put the CPU Fan down on the retention module
and snap the four retention legs of the cooling fan
into place.
5.
Flip the levers over to lock the heat sink in place
and connect the CPU cooling Fan power cable to
the CPUFAN connector. This completes the
installation.
a high quality fan with 4800 rpm at least. CPU fan and heatsink installation
procedures may vary with the type of CPU fan/heatsink supplied. The form
and size of fan/heatsink may also vary.
84
To achieve better airflow rates and heat dissipation, we suggest that you use