D-Link 32-bit Gigabit Network Adapter DGE-530T Manual page 8

DGE-530T Gigabit Ethernet Adapter Card
•
Full-duplex Gigabit Ethernet interface that delivers 2Gbps aggregate bandwidth
•
Supports half and full duplex at 10Mbps, half and full-duplex at 100Mbps, and full-duplex
operation at 1000Mbps
•
Supports for full-duplex double network throughput
•
Supports TCP/IP checksum generation and verification
•
Supports SNMP V1
•
Supports 802.3x flow control
•
Supports 802.1Q VLAN
•
Supports 802.1p Priority Tags
•
Supports Cable Diagnostic Feature
•
Supports ACPI 2.0
•
One built-in RJ-45 connector
•
Auto-negotiation to the highest available speed
•
Four LED indicators: Link/Activity, Full Duplex, 1000Mbps, 100Mbps.
•
Low profile bracket included
•
Supports Jumbo Frame up to 9K in size Driver
Microsoft Windows 98SE/98
Microsoft Windows Me
Microsoft Windows NT4.0
Microsoft Windows 2000
Microsoft Windows 2003
Microsoft Windows XP
Microsoft Windows 64bit
Linux for Kernel 2.4.x , 2.6.x
†
Check http://www.dlink.com for newest release of drivers.
NOTE: The driver for Microsoft Windows Server 2003 does not support
Network Control.
support for:
†
Client 32
DOS.ODI
Netware 5.x, 6.x
MAC OS 10.2, 10.3
Marvell VCT package
NDIS2
FreeBSD 5.3
2