Sylvania DVR90VG Owner's Manual
  1. Manuals
  2. Brands
  3. Sylvania Manuals
  4. DVD VCR Combo
  5. DVR90VG
  6. Owner's manual

Sylvania DVR90VG Owner's Manual

Dvd recorder with video cassette recorder
Hide thumbs Also See for DVR90VG:
Table of Contents

Advertisement

Quick Links

P la y a b l e d is c s
This unit is compatible to play the following discs.
Disc
Logo
DVD-VIDEO
DVD-RW (VIDEO/VR mode)
DVD-R (VIDEO mode)
is a trademark of DVD Format/Logo Licensing Corporation.
I DVD+R/+RW discs can be played back only on this unit.
R e g i on c od es
The number inside the globe refers to region of the world.
This unit can play DVDs that are labeled for ALL regions or for Region 1.
Re c o r d a b le dis c s
This unit can record to DVD-R and DVD-RW discs.
DVD-R discs can only be recorded to once, and cannot
be erased. DVD-RW discs can be recorded to and erased
many times.
DVD-R discs can only be recorded in Video mode, while
DVD-RW discs can select a recording format between Video
mode and VR mode.
Disc type
Disc format
Video mode
Playing, limited recording,
Video
limited editing
DVD-RW
DVD-RW
VR mode
Playing, recording,
DVD-RW: 1-4x
VR
Original/Playlist editing
DVD-RW
DVD-RW
Video mode
Playing, limited recording,
limited editing
DVD-R
DVD-R
DVD-R: 2x.4x.8x
DVD Recorder
DVD Recorder
with Video Cassette Recorder
with Video Cassette Recorder
DVR90VG
DVR90VG
Disc
Logo
CD-DA (AUDIO CD)
CD-RW (CD-DA FORMAT, MP3/WMA files)
CD-R (CD-DA FORMAT, MP3/WMA files)
• We strongly recommend using any DVD-R 8x,
MAXELL DVD-R 16x and DVD-RW 4x disc to assure
good recording quality.
• Discs that tested and proven to be compatible with
this recorder:
VERBATIM DVD-R 8x VERBATIM DVD-RW 2x
MAXELL DVD-R 16x
JVC DVD-RW 4x
Functions
Attributes
8cm/12cm, single-sided, single layer disc
Approx. max. recording time (SEP mode):
600 minutes (4.7GB) (for 12cm)
180 minutes (1.4GB) (for 8cm)
8cm/12cm, single-sided, single layer disc
Approx. max. recording time (SEP mode):
600 minutes (4.7GB) (for 12cm)
180 minutes (1.4GB) (for 8cm)
1
1
(Back of TV)
VIDEO
AUDIO IN
4
3
Connect
Connect
Video
Audio
cable
cable
(supplied)
(supplied)
2
Connect
DVD
DVD/VCR
DIGITAL
AUDIO
S-VIDEO
COMPONENT
S-VIDEO
IN - AUDIO - OUT
VIDEO OUT
AUDIO OUT
OUT
RF
Y
L
cable
L
P
R
OUT
B
IN
/C
B
IN - VIDEO - OUT
COAXIAL
(supplied)
R
P
R
/C
R
(Back of this unit)
2
After you have completed connections;
Press the input selector button (usually TV/VIDEO, INPUT or AUX) on your TV to switch an appropriate external input
channel (usually near channel 0) for viewing the picture from this unit.
Please refer to
"
Input Mode Names for Common TV Brands
your TV.

Initial Setting

2
– 1
2. Press [ENTER] on Channel Preset.
1. Turn on the TV and the unit in the
first time. "Initial Setting" will appear.
The unit will start getting channels
Using [K / L], select your desired
available in your area.
language for the OSD. Then press
[ENTER] to go to next step.
Initial Setting
English
Français
Español
4. Using [K / L], enter the date
5. Using [K / L], enter the time
(month / day / year).
(hour / minute). Press [{ / B].
Press [{ / B] to move the cursor.
A cursor will move on AM.
Initial Setting
Initial Setting
FEB/ 01 / 2006(WED)
12: 00 AM

DVD Playback

2
– 2
Press [POWER] to
:
Press
DVD
turn the unit on.
Press [OPEN/CLOSE A]
to open the disc tray.
POWER
OPEN/CLOSE
T-SET
TIMER PROG.
.@/:
ABC
DEF
1
2
3
GHI
JKL
MNO
CH
4
5
6
PQRS
TUV
WXYZ
VIDEO/TV
7
8
9
DISPLAY
SPACE
CLEAR
SETUP
0
TOP MENU
MENU/LIST
RETURN
ENTER
Connections
[Cable Box or Satellite Box]
OUT
IN
From Cable or
Satellite Company
OR
1
Indoor or
Outdoor Antenna
Connect
ANTENNA
IN
L
OR
R
From Cable
Company
OUT
(No Cable Box)
Watching TV/DVD
"
on page 15 of the Owner's manual or the manual accompanying
3. Clock Setting menu will appear.
Press [ENTER] twice, default date
will appear.
Initial Setting
CH 1
Auto Presetting Now
JAN/ 01 / 2006(SUN)
12: 00 AM
6. Press [K / L] to select "AM" or
"PM". Press [ENTER].
TV Program will automatically
appear.
Playing, recording, and editing discs
are available on this unit.
FEB/ 01 / 2006(WED)
12: 00 AM
POWER
OPEN/CLOSE
T-SET
TIMER PROG.
.@/:
ABC
DEF
1
2
3
CH
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
VIDEO/TV
7
8
9
Press [OPEN/CLOSE A]
DISPLAY
SPACE
CLEAR
SETUP
0
to close the disc tray.
TOP MENU
MENU/LIST
RETURN
ENTER
Press [PLAY B].
Insert a disc.
Playback will start.
• Some discs may start
playback automatically.
REC/OTR
VCR
DVD
REC/OTR
REC SPEED
PLAY
disc tray
x1.3/0.8
SKIP
PAUSE
SKIP
guide
SLOW
CM SKIP
STOP
SEARCH
DUBBING
ZOOM
AUDIO
Follow to the back side of this sheet.

Advertisement

Table of Contents
loading

Related Manuals for Sylvania DVR90VG

Summary of Contents for Sylvania DVR90VG

  • Page 1: Initial Setting

    DVD-R: 2x.4x.8x DVD Recorder DVD Recorder with Video Cassette Recorder with Video Cassette Recorder DVR90VG DVR90VG Logo After you have completed connections; Press the input selector button (usually TV/VIDEO, INPUT or AUX) on your TV to switch an appropriate external input channel (usually near channel 0) for viewing the picture from this unit.

  • Page 2: Dvd Recording

    POWER OPEN/CLOSE T-SET TIMER PROG. .@/: Easy Recording First: – 1 PQRS WXYZ VIDEO/TV DISPLAY SPACE CLEAR SETUP How to select the recording speed: Select the recording TOP MENU MENU/LIST RETURN ENTER speed. Recording Disc Size speed XP (1H) SP (2H) REC/OTR REC/OTR 8cm Disc...
  • Page 3 (You CANNOT record on any copyright protected DVD disc with this unit.) Note • Connect this unit directly to the TV. If the A/V cables are connected to a VCR, pictures may be distorted due to the copy protection system. DVR90VG • Audio/Video cables • Owner’s Manual (WPZ010TM015...

  • Page 4: Before You Start

    WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.

  • Page 5: Important Safeguards

    IMPORTANT SAFEGUARDS 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. . Retain Instructions- The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to.
  • Page 6 Installation Location For safety and optimum performance of this unit: • Install the unit in a horizontal and stable position. Do not place anything directly on top of the unit. Do not place the unit directly on top of the TV. •...
  • Page 7 Maintenance SERVICING • Please refer to relevant topics on Troubleshooting on pages 78-81 before returning the product. • If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user- serviceable parts inside. Turn off, unplug the power plug and please call our help line mentioned on the front page to locate an Authorized Service Center.

  • Page 8: Table Of Contents

    Before you start ....2 Precautions ....... 2 Table of contents .

  • Page 9: Features

    This unit not only plays back DVDs, CDs and VHS tapes but also offers features for you to record on DVD discs and edit them after that. The following features are offered with this unit. Recording DVD mode VCR mode This unit is compatible with both DVD-RW, which is rewritable repeatedly, and DVD-R, which is available for one-time recording only.

  • Page 10: Functional Overview

    Front Panel (*)The unit can also be turned on by pressing these buttons. 1. POWER button / indicator (DVD/VCR) Press to turn on and off the unit. Red LED lights up when power is on. 2. Cassette compartment (VCR) Insert a videotape here. 3.
  • Page 11 Functional overview (cont’d) Remote Control POWER OPEN/CLOSE T-SET TIMER PROG. .@/: PQRS WXYZ VIDEO/TV DISPLAY SPACE CLEAR SETUP TOP MENU MENU/LIST RETURN ENTER REC/OTR REC/OTR PLAY REC SPEED x1.3/0.8 SKIP PAUSE SKIP SLOW CM SKIP STOP SEARCH DUBBING ZOOM AUDIO ( * ) In DVD mode, the unit can also be turned on by pressing these buttons.

  • Page 12: Installing Batteries In The Remote Control

    Functional overview (cont’d) Installing batteries in the remote control Install two “AA” size batteries (supplied), matching their polarity to those indicated inside battery compartment of the remote control. Note: Incorrect use of batteries can result in hazards such as leakage and bursting. Please follow the instruction below: •...

  • Page 13: Setup Menus

    Functional overview (cont’d) Guide to Displays the On Screen menu This unit uses the following the On Screen menu for most operations: Setup Menu, Title list, Playlist, Original and Display menu. They allow you to change the playback status of the disc during playback. The Display menu also gives you information on the playback status of the disc or a videotape.

  • Page 14: Display Menu

    Functional overview (cont’d) Display menu DVD mode First: Press [DISPLAY] to call up the Display menu. This menu will give you the information on the disc. Some operations are available while disc is inserted in the unit. 0:00:00 DVD-RW Video mode CH 8 Stereo 1:01...
  • Page 15 Functional overview (cont’d) Front Panel Display Guide 1. Current Status of the unit :Appears when a disc or a videotape play is paused. :Appears when playing back a disc or a videotape. :Appears when the timer programming or OTR has been set and is proceeding.

  • Page 16: Connections

    Antenna Cable TV signal (Back of TV) Disconnect Choose one of the following connections, depending on the capabilities of the equipment you possess. Basic Audio AUDIO IN Audio cable (supplied) This unit <REAR PANEL> DVD/VCR IN - AUDIO - OUT DVD/VCR S-VIDEO COMPONENT S-VIDEO...

  • Page 17: Connection To A Cable Box Or Satellite Box

    Connection to a TV (cont’d) After you have completed connections • Switch the input selector on your TV to an appropriate external input channel (usually near channel 0). Press a button on the TV’s original remote control that selects an external input channel until the DVD recorder’s picture appears.

  • Page 18: Connection To An Audio System

    Connection to an Audio System • When you change the connections, all devices should be turned off. • Refer to the operation manual accompanying external devices for more information. Method 1 Stereo system AUDIO Audio cable (supplied) This unit <REAR PANEL> AUDIO OUT Note •...

  • Page 19: Getting Started

    The following will help you to understand easily how to record to DVD discs. Note: Make sure batteries are in the remote control and you have connected this unit and the TV correctly. Step 1: Choose a disc type. There are several types of recordable DVD discs to choose from.
  • Page 20 POWER OPEN/CLOSE T-SET TIMER PROG. .@/: Step 3: Select the recording PQRS WXYZ VIDEO/TV DISPLAY SPACE CLEAR SETUP speed. TOP MENU MENU/LIST RETURN ENTER REC/OTR REC/OTR REC SPEED PLAY x1.3/0.8 SKIP PAUSE SKIP SLOW CM SKIP SEARCH STOP DUBBING ZOOM AUDIO 0:58 Hint 1: Play the recorded contents...

  • Page 21: Initial Setting

    Turn on this unit for the first time, you need to follow these steps. Press [POWER]. Turn the TV on. Select the input to which the unit is connected. Refer to the table on page 15. “Initial Setting” will automatically appear.

  • Page 22: Adding / Deleting Channels

    Adding / deleting channels The channels you no longer receive or seldom watch can be deleted from the memory. You also may add channels into memory. Press [SETUP]. Using [K / L], select “Channel”. Press [ENTER]. Channel menu will appear. Using [K / L], select “Manual Preset”.

  • Page 23: Selecting The Tv Stereo Or Sap

    Selecting the TV stereo or SAP You can select an audio channel to output from TV. Press [SETUP]. Using [K / L], select “Required Setting”. Press [ENTER]. Required Setting menu will appear. VCR DVD Required Setting Select Video 4:3 Letter Box TV Aspect Stereo TV Audio Select...

  • Page 24: Setting The Clock

    Set the clock before you try the Timer Programming. If Public Broadcasting Service (PBS) is available in your area, follow the “Auto Clock Setting” below. If not, follow the “Manual Clock Setting” on page 3. Auto Clock Setting Make sure •...

  • Page 25: Manual Clock Setting

    Manual Clock Setting Press [SETUP]. Using [K / L], select “Clock”. Press [ENTER]. Using [K / L], select “Clock Setting”. Press [ENTER]. Clock Setting menu will appear. Clock Setting VCR DVD ---- / -- / ---- ( ---- ) -- : -- -- Press [ENTER] again.

  • Page 26: Setting The Daylight Saving Time

    Setting the Daylight Saving Time When “Daylight Saving Time” is “ON”, the clock will automatically move forward one hour at :00a. m. on the first Sunday in April and move back one hour at :00a.m. on the last Sunday in October. “ON”...

  • Page 27: Recording

    Information on DVD recording Information This unit can record on DVD-R and DVD-RW discs. DVD-R discs allow you to record programs only once, and the recorded contents cannot be erased. DVD-RW discs allow you to record programs repeatedly, and the recorded contents can be erased. You can record programs on DVD-R discs only in Video mode, while recording format for DVD-RW discs can be either Video mode or VR mode.

  • Page 28: Restrictions On Recording

    Information on DVD recording (cont’d) Restrictions on recording You cannot record copy-protected materials using this unit. Copy-protected material includes DVD- Video discs and some satellite broadcasts. If copy-protected material is encountered during a recording, recording will be paused or stop automatically and an error message will be displayed on the screen.

  • Page 29: Formatting A Disc

    Choosing the recording format of a blank disc Video DVD-RW DVD-RW DVD-RW DVD-RW When inserting a blank disc, the unit automatically starts to initialize the blank disc. You have to select your desired format before insert- ing the blank disc. Press [SETUP].

  • Page 30: Reformatting A Disc

    Reformatting a disc Video DVD-RW DVD-RW DVD-RW DVD-RW Video mode is the default recording format for DVD-RW. You can change it to VR mode from the Setup Menu. Press [SETUP]. Using [K / L], select “Disc”. Press [ENTER]. Disc menu will appear. Using [K / L], select “Format”.

  • Page 31: Basic Recording

    Video DVD-RW DVD-RW DVD-RW DVD-RW DVD-R DVD-R Follow steps below to record TV programs. Press [POWER]. Press [DVD ]. Turn on the TV and be sure to select the input to which the unit is connected. Press [OPEN/CLOSE A] . The disc tray will open.

  • Page 32: One-Touch Timer Recording

    Video DVD-RW DVD-RW DVD-RW DVD-RW DVD-R DVD-R This is a simple way to set the recording time in blocks of 30 minutes. Check that the disc has enough space for the time you set. After finishing the recording, the recorder automatically goes into standby.

  • Page 33: Timer Recording

    Video DVD-RW DVD-RW DVD-RW DVD-RW DVD-R DVD-R You can program the unit to record up to 8 programs within a month in advance. Daily or weekly program recordings are also available. • Be sure to set the clock before programming a timer recording. •...
  • Page 34 Press [ENTER] when information is entered. Your program setting will be stored. • To set another program, repeat steps  to 8. • To exit, press [TIMER PROG.] or [SETUP]. • When programs are overlapped, “Overlap” and the overlapped program numbers will appear on the TV screen.

  • Page 35: Hints For Timer Recording

    Hints for Timer Recording • If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer settings will be lost. • If a recordable disc is not on the tray or an unrecordable disc is on the tray, the DVD indicator on the front panel flashes and Timer recording cannot be performed.

  • Page 36: Settings For An External Source

    Settings for an external source Connection to an external source Video DVD-RW DVD-RW DVD-RW DVD-RW DVD-R DVD-R Connect the external source properly to the unit by using input jacks either LINE (Front) or LINE1 (Rear). When connecting an external equipment of monaural output to this unit, use AUDIO L jack of LINE 1 (Rear) or LINE  (Front).

  • Page 37: Recording From An External Source

    Settings for an external source (cont’d) Recording from an external source Video DVD-RW DVD-RW DVD-RW DVD-RW DVD-R DVD-R Before recording from an external source, see the instructions for the connection on page 34. 1. Turn on the TV and this unit and be sure to select the input of the TV to which the unit is connected.

  • Page 38: Finalizing The Discs

    Video DVD-RW DVD-RW DVD-RW DVD-RW DVD-R DVD-R You will need to finalize discs recorded in Video mode to play them back on other DVD players. Finalizing may take several minutes up to an hour. (It can take up to 15 minutes for a disc recorded in Video mode and 60 minutes for a disc recorded in VR mode.)

  • Page 39: Auto Finalize

    Finalizing the discs (cont’d) Auto finalize Video DVD-RW DVD-RW DVD-R DVD-R You can finalize discs automatically using Auto Finalize function. This function automatically finalizes discs after all Timer Recordings are completed and when the disc space runs out. Press [SETUP]. Using [K / L], select “Recording”.

  • Page 40: Dubbing Mode

    Video DVD-RW DVD-RW DVD-RW DVD-RW DVD-R DVD-R You can copy a DVD disc to a videotape or copy a videotape to a DVD disc. This function will be possible only if the DVD disc or the videotape is not copy protected.
  • Page 41 VCR to DVD Using [K / L], select “VCR DVD”. Press [ENTER]. Dubbing Mode VCR DVD DVD VCR Press [SETUP] to exit. Press: Make sure to select a recording speed using [REC SPEED]. Press: Press [PLAY B]. Then press [PAUSE F] at the point you wish to start recording.

  • Page 42: Playing Discs

    Information on DVD playback Before you play DVD discs, read the following information. Playable discs This unit is compatible with the following discs. To play back a DVD, make sure that it meets the requirements for Region Codes and Color Systems as described below.

  • Page 43: Basic Playback

    Playback Video DVD-RW DVD-RW DVD-RW DVD-RW DVD-R DVD-R Press [POWER]. Press [DVD ]. Turn on the TV and be sure to select the input to which the unit is connected. Press [OPEN/CLOSE A] . The disc tray will open. Insert your disc with its label fac- ing up.

  • Page 44: Playing Mp3 / Wma Disc

    DVD-V DVD-V DVD-V DVD-V Press [POWER]. Press [DVD ]. Turn on the TV and be sure to select the input to which the unit is connected. Press [OPEN/CLOSE A] to open the disc tray. The disc tray will open. Insert your disc with its label fac- ing up.

  • Page 45: Playing Discs Using The Disc Menu

    Playing discs using the Disc menu DVD-V DVD-V DVD-V DVD-V A DVD disc contains a Disc menu that describes the contents or allows you to customize the playback. For example, the menu may offer choices for subtitle languages, special features, or chapter selection.

  • Page 46: Special Playback

    Resume playback Video DVD-V DVD-V DVD-RW DVD-RW DVD-RW DVD-RW DVD-V DVD-V DVD-R DVD-R You can resume playback from where you stopped it last time. During playback, press [STOP C]. The resume message will appear. Resume ON Fast forward / Fast reverse Video DVD-RW DVD-RW...

  • Page 47: Rapid Play

    Rapid Play Video DVD-RW DVD-RW DVD-V DVD-V DVD-V DVD-V DVD-RW DVD-RW DVD-R DVD-R Rapid Play function is available only during playback. Available only on discs recorded in the Dolby Digital format, Rapid Play plays back in a slightly faster/slower speed while keeping the sound quality just as normal playback.

  • Page 48: Zoom

    Zoom Video DVD-V DVD-V DVD-RW DVD-RW DVD-RW DVD-RW DVD-V DVD-V DVD-R DVD-R During playback, press [ZOOM]. Zoom menu will appear. 0:00:00 DVD-Video There are four options (x1.0, x1., x1.5 and x.0), these are displayed excluding the current zoom rate. Marker Setup Video DVD-V DVD-V...

  • Page 49: Search

    Title / Chapter search Video DVD-V DVD-V DVD-RW DVD-RW DVD-RW DVD-RW DVD-V DVD-V Using [SKIP H / G] During playback, press [SKIP G] to skip the current title or chapter and move to the next. The title or chapter will move forward by one at a time. •...

  • Page 50: Track Search

    Track search Using [SKIP H / G] During playback, press [SKIP G] to skip the current track and move to the next. To go back to the beginning of the current track, press [SKIP H]. Press it repeatedly to go to the previous tracks. Using [DISPLAY] During playback, press [DISPLAY].

  • Page 51: Repeat/Random/Program Playback

    Repeat/Random/Program playback Repeat playback Video DVD-RW DVD-RW DVD-V DVD-V DVD-V DVD-V DVD-RW DVD-RW DVD-R DVD-R During playback, press [DISPLAY]. The display menu will appear. 0:00:00 DVD-Video Using [{ / B], select . Press [ENTER]. Repeat menu will appear. <DVD-Video> 0:00:00 DVD-Video Title Chapter...

  • Page 52: Program Play

    Repeat/Random/Program playback (cont’d) Program play You can program a playback sequence in your desired order. First: Press [SETUP]. Using [K / L], select “CD Playback Mode”. Press [ENTER]. CD Playback Mode menu will appear. Using [K / L], select “Program Play”.

  • Page 53: Switching Audio Soundtrack

    Selecting a format of audio and video (cont’d) Switching audio soundtrack DVD-V DVD-V DVD-V DVD-V DVD-RW DVD-RW When playing back a DVD-Video disc recorded with two or more soundtracks (these are often in different languages), you can switch between them during playback.

  • Page 54: Switching Camera Angles

    Selecting a format of audio and video (cont’d) Using [K / L], select “OFF”, “Type1” or “Type2”. Press [ENTER]. Switching camera angles DVD-V DVD-V DVD-V DVD-V Some DVD-Video discs feature scenes shot from two or more angles. The disc package should be marked with an angle icon if it contains multi-angle scenes.

  • Page 55: Editing

    Information on disc editing Guide to a title list Title list allows you to check the titles recorded on the disc easily. You can choose a title to play it back from this screen and easily edit the titles as you prefer.

  • Page 56: Editing Discs In Video Mode

    Deleting titles Video DVD-R DVD-R DVD-RW DVD-RW You can delete titles which you do not need anymore. Be advised that the titles once deleted cannot be recovered. In Video mode, recordable disc space of DVD-RW disc will increase when the last title on the title list is deleted.

  • Page 57: Putting Names On Titles

    Editing discs in Video mode (cont’d) Putting names on titles Video DVD-R DVD-R DVD-RW DVD-RW You can name titles and change the names from this menu. The names you put on the titles will be displayed on a Title List. First: Follow steps 1 to 3 on page 54 to display the Edit menu.

  • Page 58: Setting Or Clearing Chapter Markers

    Editing discs in Video mode (cont’d) Setting or clearing chapter markers Video DVD-RW DVD-RW You can put chapter markers on each title and use them for the chapter search feature. You can specify time interval for chapter markers for titles last more than 5 minutes.

  • Page 59: Editing Discs In Vr Mode (Original)

    Editing discs in VR mode (Original) Deleting titles DVD-RW DVD-RW When a title is deleted from an original list in VR mode, the recordable disc space will increase. Be advised that the titles once deleted cannot be recovered. First: Press [TOP MENU], and then press [MENU / LIST] to change “Playlist”...

  • Page 60: Setting Titles To Protect

    Editing discs in VR mode (Original) (cont’d) Setting titles to protect DVD-RW DVD-RW To prevent accidental editing or title erasing, you can protect the contents in the original menu. First: Follow steps 1 to 3 on page 57 to display the Original menu. Using [K / L]] , select “Protect”.

  • Page 61: Releasing Titles From Protecting

    Editing discs in VR mode (Original) (cont’d) Releasing titles from protecting DVD-RW DVD-RW You can cancel the title-protecting feature. First: Follow steps 1 to 3 on page 57 to display the Original menu. A “ ” icon is shown on the pro- tected titles.

  • Page 62: Editing Discs In Vr Mode (Playlist)

    Editing discs in VR mode (Playlist) Deleting titles DVD-RW DVD-RW In VR mode, even if a title is deleted from a Playlist, the original title will remain on the Original list, and recordable disc space will not increase. First: Press [TOP MENU] , and then press [MENU / LIST] to change “Original”...

  • Page 63: Dividing A Title

    Editing discs in VR mode (Playlist) (cont’d) Dividing a title DVD-RW DVD-RW You can divide a title into two new titles. First: Follow steps 1 to 3 on page 60 to display the Playlist menu. Using [K / L], select “Title Dividing”.

  • Page 64: Combining Titles

    Editing discs in VR mode (Playlist) (cont’d) Combining titles DVD-RW DVD-RW You can combine two titles into a single title. First: Follow steps 1 to 3 on page 60 to display the Playlist menu. Using [K / L], select “Title Combining”.

  • Page 65: Adding Titles To A Playlist

    Editing discs in VR mode (Playlist) (cont’d) Adding titles to a Playlist DVD-RW DVD-RW You can add or delete a title on the playlist as you prefer. You can add up to 99 titles to a Playlist. First: Follow step 1 on page 60 to display the Playlist.

  • Page 66: Editing Discs In Vr Mode (Original / Playlist)

    Editing discs in VR mode (Original / Playlist) Deleting parts of titles DVD-RW DVD-RW You can delete a specific part of a title. Even if parts of title are deleted from the Playlist, the original title will remain as it was, and recordable disc space will not increase.

  • Page 67: Putting Names On Titles

    Editing discs in VR mode (Original / Playlist) (cont’d) Putting names on titles DVD-RW DVD-RW You can name titles and change the names in this menu. The names you put on the titles will be displayed on a Title List. First: Follow steps 1 to 3 on page 64 to display Original or Playlist...

  • Page 68: Setting Or Clearing Chapter Markers

    Editing discs in VR mode (Original / Playlist) (cont’d) Setting or clearing chapter markers DVD-RW DVD-RW You can put chapter markers on each title and can use them for the chapter search feature. You can put a chapter marker anywhere you want until the total number of the markers reaches 999.

  • Page 69: Setting Pictures For Thumbnails

    Editing discs in VR mode (Original / Playlist) (cont’d) Setting pictures for thumbnails DVD-RW DVD-RW You can set an image picture for each title as a thumbnail. It helps you remember the contents of the title during playback. The default setting chooses the first scene of each title as the thumbnail.

  • Page 70: Changing The Setup Menu

    Changing the Setup menu The following table shows the items which you can change the setting and their default settings. Refer to the following table for your convenience. Setup Items (highlight is the default) 1.Language setting Disc Menu Language Pages 69-70 Audio Language Subtitle Language .Display setting...

  • Page 71: Language Setting

    Changing the Setup menu Press [STOP C] if you are playing a disc. Press [SETUP]. Using [K / L], select “Playback”. Press [ENTER]. Playback menu will appear. Using [K / L], select “Language”. Press [ENTER]. Language menu will appear. Using [K / L], select a desired item. Press [ENTER]. Disc Menu Language (Default : English) Set the language for Disc Menu.

  • Page 72: Display Setting

    Changing the Setup menu Subtitle Language (Default : OFF) Set the Subtitle language. Language Disc Menu English Audio Original Subtitle If “Other” is selected, press 4-digit code using the Number buttons. Language - Subtitle Code Input Press [SETUP] to exit. Press [STOP C] if you are playing back a disc.

  • Page 73: Audio Setting

    Changing the Setup menu OSD Language (Default : English) Set the language for OSD. Display VCR DVD OSD Language English Angle Icon Screen Saver 10 minutes FL Dimmer Bright Angle Icon (Default : ON) Set to ON or OFF. Display OSD Language English Angle Icon...

  • Page 74: Dolby Digital

    Changing the Setup menu Using [K / L], select “Playback”. Press [ENTER]. Playback menu will appear. Using [K / L], select “Audio”. Press [ENTER]. Note • Dynamic Range Control function is available only on the discs which are recorded in the Dolby Digital format. Digital Out Set the digital audio output.

  • Page 75: Video Setting

    Changing the Setup menu Still Mode (Default : Auto) Set the type of still image in pausing playback. Press [STOP C] if you are playing a disc. Press [SETUP]. Using [K / L], select “Playback”. Press [ENTER]. Your setting will be activated. Using [K / L], select “Video”.
  • Page 76 Changing the Setup menu Settings for Parental lock level (cont’d) Parental Lock (Default : All) Set the Parental Lock level. Playback Audio Video Language Parental Lock A password has not been set yet Parental Lock Change Password? • Using [K / L], select “Yes”. Press [ENTER].

  • Page 77: Vcr Functions

    Playback Press [POWER] on the remote control or the front panel of the unit. When you are playing a videotape, turn the TV on and be sure to select the input to which the unit is connected. Press: Insert a prerecorded videotape. Press [PLAY B] to begin playback.

  • Page 78: One-Touch Timer Recording

    Recording and One-touch Timer Recording (cont’d) One-touch Timer Recording This feature allows you to set the recording length simply by pressing [REC/OTR] (VCR) on the remote control or [VCR RECORD] on the front panel of the unit. During normal recording, press [REC/OTR] to begin One-touch Timer Recording.

  • Page 79: Time Search

    Time search This feature allows you to go to a specific point on a videotape by entering the exact amount of time you wish to skip in order to reach the point. First: Press [SEARCH] repeatedly so that the TIME SEARCH menu appears.

  • Page 80: Others

    Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper performance. Symptom The power does not turn on. There is no picture.
  • Page 81 Symptom There is no picture. Picture noise appears. There is no sound. Sound is noisy. No DTS sound is output. The unit does not play back the disc. Playback image freezes for a second. The disc does not start playback from the beginning.
  • Page 82 Symptom “Repairing” appears on the TV screen. • If there is a power failure or unplugging during recording, finalizing, Repairing In a case you intend to cancel the Repairing process. Do you want to cancel a repairing process ? When selecting “Yes”, the disc may not be usable.

  • Page 83: Rf Output Switch

    Error message Recording Error You cannot record more than 99 titles on one disc. (The maximum is 99) Recording Error You cannot record more than 999 chapters on one disc. (The maximum is 999) Recording Error You cannot record on this disc as Control Information is full.

  • Page 84: Glossary

    Analog audio An electrical signal that directly repre- sents sound. In contrast, digital audio which can be an electrical signal, but is an indirect representation of sound. See also Digital audio. Aspect ratio The width of a TV screen relative to its height.

  • Page 85: Frequently Asked Questions

    Frequently Asked Questions –– Can I record on CD-RW/R? No, this unit records only DVDs. –– Can I play back DVD-Video that is bought in another country? Possible only if the region code of the disc is 1 and ALL. ––...

  • Page 86: Español

    Estas instrucciones le ayudarán a entender fácilmente cómo grabar discos DVD. Nota: Asegúrese que las pilas están en el mando a distancia y que ha conectado correctamente esta unidad y el TV. Paso 1: Elija un tipo de disco. Puede elegir entre distintos tipos de discos DVD grabables.
  • Page 87 Fácil grabación de DVD (cont.) POWER OPEN/CLOSE T-SET TIMER PROG. Paso 3: Seleccione .@/: la velocidad PQRS de grabación. WXYZ VIDEO/TV DISPLAY SPACE CLEAR SETUP TOP MENU MENU/LIST RETURN ENTER REC/OTR REC/OTR REC SPEED PLAY x1.3/0.8 SKIP PAUSE SKIP SLOW CM SKIP STOP SEARCH...
  • Page 88 Reproducción con videograbadora Presione [POWER] en el mando a distancia o el panel frontal de la unidad. Cuando reproduzca una cinta, conecte el TV y asegúrese de seleccionar la entrada donde se conecta la unidad. Presione: Coloque una cinta pregrabada y presione [PLAY B] para empe- zar la reproducción.
  • Page 89 Grabación y grabación con temporizador de un toque (VCR) Grabación Antes de grabar, asegúrese de que: • Se seleccionó el canal deseado presionando los botones numéricos en el mando a distancia o [CHANNEL L / K] en el panel frontal de la unidad. •...

  • Page 90: Limited Warranty

    FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase.

Table of Contents