Connection Diagram For Dsp Option - DICE Silverline DUO Installation Manual

12

Connection diagram for DSP option

BMW vehicles with Digital Signal Processing (DSP) must use the DSP Kit (PN: ACC-BMW-DSP). To confirm
if the vehicle has DSP, check for a bare metal coax cable and a 3-pin connector (for connector locations see
page 13). DSP was only an option on some BMW 5-Series, 7-Series, X5, Z4 and X3 vehicles.
DSP
Converter
connect to car
coax connector
connect to
module
connect to 12V+
connect to car
switched power
3-pin connector
Power Cable
and ground
BMW Interface Harness (12ft.)
RCA/6-PIN DSP Harness