Magnavox MWR10D6 Owner's Manual page 11

Rear Panel
1 2
IN
OUT
ANTENNA AUDIO IN
11
1. ANTENNA IN jack
Use to connect an antenna.
2. VIDEO IN jack (EXT1)
Use to connect external equipment with a stand-
ard video cable.
3. VIDEO OUT jack
Use to connect a TV monitor, AV receiver or
other equipment with a standard video cable.
4. AC Power Cord
Connect to a standard AC outlet to supply power
to this unit.
5. COAXIAL DIGITAL AUDIO OUTPUT jack
Use to connect an AV receiver, Dolby Digital
decoder or other equipment with a coaxial digital
input jack with a digital coaxial cable.
6. AUDIO OUT jacks
Use to connect a TV monitor, AV receiver or
other equipment with a standard audio cable.
Note
• Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent
damage to the unit.
• This unit does not have the RF modulator.
Before you start
Functional overview (cont'd)
3
COMPONENT
VIDEO IN VIDEO OUTPUT
VIDEO OUT
S-VIDEO
Y
IN OUT DIGITAL AUDIO OUTPUT
PCM / BITSTREAM
L L
P /C
B B
R
R
P R /C R COAXIAL
AUDIO OUT
(E1)
10 9 8 7 6 5
4
7. COMPONENT VIDEO OUTPUT jacks
Use to connect a TV monitor with component
video inputs with a component video cable.
8. S-VIDEO OUT jack
Use to connect the S-Video input of a TV moni-
tor, AV receiver or other equipment with an S-
Video cable.
9. S-VIDEO IN jack (EXT1)
Use to connect the S-Video output of external
equipment with an S-Video cable.
10. AUDIO IN jacks (EXT1)
Use to connect external equipment with a stand-
ard audio cable.
11. ANTENNA OUT jack
Use to connect an antenna cable to pass the sig-
nal from the TV ANTENNA IN to your TV moni-
tor.
EN 9