Auto Correctionof Brightnessand Contrast - Canon Rebel SL1 EOS 100D Instruction Manual

Auto Correctionof Brightnessand Contrast*
If the image comes out dark or the contrast is low, the brightness and
contrast can be corrected automatically. This function is called Auto
Lighting Optimizer. The default setting is [Standard]. With JPEG
images, the correction is applied when the image is captured.
In Basic Zone modes, [Standard] is set automatically.
Select [Auto Lighting Optimizer].
Under the [1_12] tab, select [Auto
Lighting Optimizer], then press
<SET>.
Select the setting.
Select the desired setting, then press
<SET>.
iiii!!ii!!!!ii iiiii
Take the picture.
The image will be recorded with the
brightness and contrast corrected if
necessary.
_L_ ;, Under [ft4: Custom Functions (C.Fn)], if [3: Highlight tone priority] is
set to [1 : Enable], the Auto Lighting Optimizer will be set automatically to
[Disable] and the setting cannot be changed.
, If a setting other than [Disable] is set and you use exposure
compensation or flash exposure compensation to darken the exposure,
the image may still come out bright. If you want a darker exposure, set
this function to [Disable].
Depending on the shooting conditions, noise may increase.
In step 2, if you press the <INFO.> button and uncheck <_/> the [Disable
during man expo] setting, the Auto Lighting Optimizer can also be set in
the <M> mode.
13O