Canon REBEL SL1 EOS 100D Instruction Manual page 9

Custom Function Settings*
± o, =l • l_.l I
You can assign a frequently-used function to <B/SET>. When the
camera is ready to shoot, pressing the <_I/$ET> button will display
the respective function setting screen.
0: Quick Control screen
The Quick Control screen will appear.
1: Image quality
The Image quality setting screen will appear. Select the desired
image-recording quality, then press <I_I/$ET>.
2: Flash exposure compensation
The Flash exposure compensation setting screen will appear. Set
the flash exposure compensation, then press <I_I/$ET>.
3: LCD monitor On/Off
Assigns the same function as the <INFO.> button.
4: Menu display
The menu screen will appear.
5: ISO speed
The ISO speed setting screen will appear. Set the ISO speed with
the <'4 > < I_ > keys or < _ > dial. You can also set the ISO speed
looking through the viewfinder.
0: Display on
When the power switch is turned on, the shooting settings will be
displayed (p.50).
1: Previous display status
If you pressed the <INFO.> button and turned off the camera while
the LCD monitor was off, the shooting settings will not be
displayed when you turn on the camera again. This helps to save
battery power. The menu screens and image playback will still be
displayed when used.
If you pressed the <INFO.> button to display the shooting settings
and then turn off the camera, the shooting settings will be
displayed when you turn on the camera again.
3O4