Canon POWERSHOT A2500 User Manual page 10

Prepare for shooting as follows.
p the Strap
Attach the strap.
® Thread the end of the strap through the
strap hole ((_), and then pull the other
end of the strap through the loop on the
threaded end (@).
/ .........
Holding,, the Camera
® Place the strap around your wrist.
® When shooting, keep your arms close to
your body and hold the camera securely
to prevent it from moving. Do not rest
your fingers on the flash.
the Battery
Before use, charge the battery with the included charger. Be sure to charge
the battery initially, because the camera is not sold with the battery charged.
_
Insert the
battery.
® After aligning the A marks on the battery
and charger, insert the battery by pushing
it in (_) and down (@).
2 Charge the battery.
® CB-2LF: Flip out the plug (d_) and plug
the charger into a power outlet (@).
® CB-2LFE: Plug the power cord into the
charger, then plug the other end into a
power outlet.
The charging lamp turns orange and
charging begins.
When charging is finished, the lamp turns
green.
3 Remove the battery.
® After unplugging the battery charger,
remove the battery by pushing it in (_)
and up (_2)).
_@i!i!ii!_!i_!ii_!_ _ii_i_ii_ii_
@@
10