Image Brightness - Canon POWERSHOT A2500 User Manual

_ii!lii:iiiii!!l_ii@i_tiilii! ill _ iiiiiiiiii ilii_i !lliilililil;!iii
Customization (Live View
Image brightness or colors when shooting can be easily customized as
follows.
Enter [LIVE] mode.
® Follow step 1 in "Specific Scenes"
(_i_40) and choose [LIVE].
2 Configure the setting.
® Press the <v> button to access the
setting screen. Press the <_=><v>
buttons to choose a setting item, and
then press the <_><_,> buttons to adjust
the value as you watch the screen.
® Press the <@> button.
3
Shoot.
Brightness
Color
Tone
_t_ing With Reduced Blur _Di_ital IS)
Shoot with minimal camera shake and subject blur. In scenes without
people, continuously shot images can be combined to reduce camera
shake and noise.
Enter [_._1] m ode.
® Follow step 1 in "Specific Scenes"
(_._40) and choose [_)].
2 Shoot.
® Press the shutter button halfway. [i__ld]is
displayed on the left side of the screen in
scenes without people.
® When [i.i.i._]is displayed, press the shutter
button all the way down. Images will be
shot continuously, and then be combined.
® When the icon is not displayed, press the
shutter button all the way down to shoot a
single image.
Because the camera will shoot continuously when [ij_] is displayed,
hold it steady while shooting.
In some scenes, images may not look as expected.
The flash will not fire when [Ijjj] is displayed, even in low-light
conditions.
In scenes with people, the camera will shoot continuously when you
have set the flash to [@)].
o When using a tripod, shoot in [AUTO] mode.
o [¢2_)]mode resolution is [ M ] (2304 x 1728) and cannot be changed.
@@
41