Display Bezel; Display Panel - Dell Precision M60 Service Manual
Hide thumbs
Also See for Precision M60:
- Information manual (330 pages) ,
- System information manual (200 pages) ,
- Service manual (44 pages)
Table of Contents
Advertisement
1 display
2 display cable connector
3 computer base
4 pull-tab
5 connector
1
display bumpers (8)
4
2
M2.5 x 6-mm screws (8)
5
3
display bezel
6
Display Bezel
CAUTION:
Before performing the following procedures, read the safety instructions in your System Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1. Follow the instructions in
"Preparing to Work Inside the
2. Remove the
central control
3. Remove the
display
assembly.
4. Use a plastic scribe to pry the eight display bumpers out of the screw holes located on the front of the bezel.
5. Remove the eight M2.5 x 6-mm screws located on the front of the bezel.
NOTICE:
Carefully separate the bezel from the top cover to avoid damage to the bezel.
6. Starting at the bottom of the display panel (by the Dell™ logo), use your fingers to separate the bezel from the top cover by lifting the inside edge of
the bezel away from the top cover.
Display Panel
display panel
top cover
M2 x 3-mm screws (9)
Computer."
cover.
Advertisement
Table of Contents
