Display Assembly - Dell Precision M60 Service Manual
Hide thumbs
Also See for Precision M60:
- Information manual (330 pages) ,
- System information manual (200 pages) ,
- Service manual (44 pages)
Table of Contents
Advertisement
Back to Contents Page
Display Assembly
Dell Precision™ M60 Service Manual
Display Assembly
Display Bezel
Display Panel
Display Assembly
CAUTION:
Before performing the following procedures, read the safety instructions in your System Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE:
You must remove the display assembly before you remove the palm rest.
1. Follow the instructions in
"Preparing to Work Inside the
2. Turn the computer over and remove the two M2.5 x 12-mm screws labeled "D" on the bottom of the computer.
3. Turn over the computer and open the display.
4. Remove the
central control
5. Disconnect the display cable using the pull-tab, and release the cable from the four cable-routing clips.
6. Lift the display out of the computer.
Computer."
cover.
Advertisement
Table of Contents
