Repeat / Random / Programmed Playback; Repeat Playback; Repeat A-B Playback; Random Playback - Magnavox DV200MW8 Owner's Manual

Repeat / Random / Programmed Playback

Repeat Playback

DV DVD
Repeat function is available only during playback.
1 Press [REPEAT] during playback.
REPEAT
PLAY
Each time you press [REPEAT], repeat function changes as
example below.
OFF
CHAPTER
TITLE
OFF
TRACK
ALL
Hint
• Repeat setting (except "ALL") will be cleared when moving to
another title, chapter, track or group.
• Repeat playback are not available with some discs or during repeat
A-B playback.

Repeat A-B Playback

DVD DV
Repeat function is available only during playback.
1 Press [A-B] at your desired starting point (A).
A-B
PLAY
2 Press [A-B] at your desired ending point (B).
A-B
• Point B should be in the same title or track as point A.
Hint
• To exit the sequence, press [A-B] so that "OFF" appears.
• To cancel point A, press [CLEAR/C.RESET] at step 1.
• This function does not work in the other repeat modes.
<Example : DVD>
(repeat off)
(current chapter repeat)
(current title repeat)
(repeat off)
(current track repeat)
(entire disc repeat)
A-
A-B
– 14 –

Random Playback

DV DVD
This function shuffles the playing order of tracks instead
of playback in sequence.
Press [MODE] twice.
1
MODE
STOP
2 Press [PLAY B] to start Random Playback.
PLAY
Hint
• To repeat the current track in the random selections, press
[REPEAT] repeatedly until "
• To repeat the entire random selections, press [REPEAT] repeat-
edly until " ALL" appears during playback.
• During random playback, you cannot go back to the previous track.

Programmed Playback

DVD DV
You may determine the order in which tracks will play.
1 Press [MODE] once.
STOP
Using [K/L] to select desired track.
2
Press [ENTER].
ENTER
or
• Up to 99 tracks can be programmed.
• If eight or more tracks were in a program,
use [SKIP H, G] to see all the tracks.
Press [PLAY B] to start Programmed Playback.
3
PLAY
Hint
• Press [CLEAR/C.RESET] at step 2 to erase the most recently
entered track.
• To erase all programmed tracks at once, select "ALL CLEAR'' and
press [ENTER] at step 2.
• While a program is being played back, [STOP C] works as follows;
⇒ Press [STOP C] and [PLAY B] next, so that the programmed
playback restarts. (CD playback restarts from the current point.)
⇒ Press [STOP C] twice and [PLAY B] next, so that playback
restarts from the first track in the original order. However, your
programmed playback can be restarted when you follow the
above steps. (Your programs are still stored until either the disc
tray is open or power is turned off.)
• To repeat the current track in the program, press [REPEAT]
repeatedly until " TRACK'' appears during playback.
• To repeat the entire program, press [REPEAT] repeatedly until
" ALL'' appears during playback.
RANDOM
CD-DA TOTAL 0:45:55
RANDOM PROGRAM
--no indication--
PLAY
TRACK" appears during playback.
CD-DA TOTAL 0:00:00
MODE
CD-DA TOTAL 1:03:30
1 3:30
5 5:10
10 4:20
11 3:00
12 3:20
17 4:10
22 2:50
2/3
EN