Dvd Functions; Playback - Magnavox DV200MW8 Owner's Manual

Playback

Before: Turn on the TV, amplifier and
any other components which are
connected to this unit. Make sure the
TV and audio receiver (not included)
are set to the correct channel.
DVD DV
1 2 Insert a disc with
label facing up.
STANDBY-ON OPEN/CLOSE
3 To start 4 To stop
playback playback
PLAY
DVD menu
DVD DV
Some discs contain menus which allow you to customize
DVD playback. Use [K / L / s / B] to select an item, then
press [ENTER] (or [PLAY B]).
Calling Up a Menu Screen during Playback
DV DVD
• Press [MENU] to call up the DVD menu.
• Press [TOP MENU] to call up the title menu.
Hint
• Menu operations may vary depending on the disc. Refer to the
manual accompanying the disc for details.
Resume
DV DVD
Press [STOP C] during playback.
Resume message will appear on
the TV screen.
Press [PLAY B], playback will
resume from the point at which
playback was stopped.
Hint
• To cancel resume, press [STOP C] one more time in the stop mode.
• The resume information stays on even when the power is turned off.
Paused and Step-by-Step Playback
DV DVD
Press [PAUSE F] during playback.
To continue playback, press [PLAY B].
DVD DV
The disc goes forward by one frame each time [PAUSE F] is
pressed in the pause mode.
To continue playback, press [PLAY B].
Hint
• On DVDs, set "STILL MODE" to "FIELD" in the DISPLAY menu if
pictures in the pause mode are blurred. (Refer to 16-17.)
To use [PREV H], [NEXT G] on this unit
DVD DV
Press once to skip chapters, tracks or titles to a desired point.

DVD Functions

STANDBY-ON
1
1 2 3
4 5 6
7 8 9
CLEAR/
C. RESET
0 +10
DISPLAY VCP DVD
3
PLAY
4
STOP
Hint
• A "prohibited icon" may appear at the top-right on the TV screen when the operation
is prohibited by the disc or this unit.
• Some DVDs may be played from title 2 or 3 due to specific programs.
• During the playback of a two-layered disc, pictures may stop for a moment. This
happens while the 1st layer is being switched to the 2nd layer. This is not a malfunction.
STOP
TIP: You can change the on-screen language for DVD function in "PLAYER MENU" setting. (Refer to 16.)
Resume ON
Press 'PLAY' to play from here.
To play the beginning,
press 'STOP' first and then 'PLAY'.
OPEN/CLOSE
STANDBY-ON
TRACKING
POWER ON
MODE
REW F.FWD STOP/EJECT
1
Lights up when power is on.
Fast Forward / Reverse Search
Press [g] or [h] repeatedly during playback to
select the required forward or reverse speed.
To use [PREV H], [NEXT G] on this unit
Pressing and holding [PREV H] or [NEXT G] on this unit
will also change forward or reverse playback speed.
To continue playback, press [PLAY B].
Hint
• For DVDs, fast forward or reverse search speed is different depending
on the disc. Approximate speed is 1(x2), 2(x8), 3(x20), 4(x50), 5(x100).
• For Audio CDs, approximate speed is 1(x2), 2(x8), 3(x30).
Slow Forward / Reverse
DVD DV
Press [g] or [h] repeatedly in the pause mode
to select the required forward or reverse speed.
To use [PREV H], [NEXT G] on this unit
Pressing and holding [PREV H] or [NEXT G] on this
unit in the pause mode will also change forward or reverse
playback speed.
To continue playback, press [PLAY B].
Hint
• Slow forward or reverse speed is different depending on the disc.
Approximate speed is 1(1/16), 2(1/8), 3(1/2).
• Set "STILL MODE" to "FIELD" in the DISPLAY menu if pictures in
the slow playback mode are blurred. (Refer to 16-17.)
Zoom
DVD DV
1) Press [ZOOM] during playback.
2) Press [ZOOM] repeatedly to select the required zoom
factor: x2, x4 or OFF.
x2
3) Press [K / L / s / B] to slide the zoomed picture across
the screen.
4) To exit zoom mode, press [ZOOM] to select OFF.
Hint
• Zooming function does not work while the disc menu is displayed.
• x4 zoom is not available on some discs.
• The picture may be distorted when you press [PAUSE k] or [h]
repeatedly in the zoom mode.
• In the zoom mode, it automatically changes
zoomed position guide.
– 11 –
OPEN/CLOSE
PLAY CAS.IN
IR
PLAY
1
DVD DV
x4
VCP DVD DISC IN PLAY
SOURCE PREV STOP PLAY NEXT
2 4 3
1
E
1
x2(x4) to the
EN