Replacing the AC Adapter Connector
1. Follow the procedures in
Before You
2. Place the AC adapter connector on the system board.
3. Connect the AC adapter connector cable to the system board connector.
4. Route the Mini-Card antenna cables through the routing guides.
5. Connect the antenna cables to the WWAN card, if applicable (see
6. Connect the antenna cables to the WLAN card, if applicable (see
7. Replace the I/O board (see
8. Replace the palm rest bracket (see
9. Replace the memory module (see
10. Replace the hard drive (see
11. Connect the speaker cable to the speaker cable connector on the I/O board (see
12. Replace the palm rest (see
13. Replace the keyboard (see
14. Replace the battery (see
Replacing the
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Back to Contents Page
Begin.
Replacing the I/O
Board).
Replacing the Palm Rest
Bracket).
Replacing the Memory
Module).
Replacing the Hard
Drive).
Replacing the Palm
Rest).
Replacing the
Keyboard).
Battery).
Replacing the WWAN
Card).
Replacing the WLAN
Card).
Replacing the
Speakers).