1
camera cable connector
3
Mini-Card antenna cables
14. Remove the two screws (one on each side) that secure the display assembly to the computer base.
1
display assembly
15. Lift the display assembly off the computer.
Replacing the Display Assembly
1. Follow the procedures in
Before You
2. Place the display assembly in position and replace the two screws (one on each side) that secure the display assembly to the computer base.
3. Route the Mini-Card antenna cables through the routing guides.
4. Connect the antenna cables to the WWAN card, if applicable (see
5. Connect the antenna cables to the WLAN card, if applicable (see
2
display cable connector
2
screws (2)
Begin.
Replacing the WWAN
Replacing the WLAN
Card).
Card).