U
NPACKING AND
This chapter provides unpacking and setup information for the DES-1016D.
Unpacking
Open the shipping carton for the Switch and carefully unpack its contents.
The carton should contain the following items:
One DES-1016D 16-port 10/100Mbps Fast Ethernet Switch
One AC power cord, suitable for your area's electrical power
connections
Four rubber feet to be used for shock cushioning
Screws and two mounting brackets
Quick Installation Guide
This User's Guide
If any item is found missing or damaged, please contact your local reseller
for replacement.
Setup
Please consider the following when setting up the Switch:
1. The surface must support at least 5 kg.
2. The power outlet should be within 1.42 meters (6 feet) of the device.
3. Visually inspect the power cord and see that it is secured fully to the AC
power connector.
S
ETUP
5