Section 1: Unpack; Contents Of Shipping Box; Keep Your Packing Materials; What's Next - 3M Multimedia Projector MP8660 Operator's Manual

1-1. Contents of Shipping Box

The 3M Multimedia Projector MP8660 is shipped with the necessary cables required for standard VCR, PC,
Apple Macintosh or laptop computer connections. Carefully unpack and verify that you have all of the items
shown below in Figure 1-1.
MP8660 Projector
3-Conductor
Video/Audio Cable
ADB Adaptor Cable
The following items are optional and are not packed with the projector:
RS-232 Control Cable
SVGA MAC Monitor Adaptor

1-2. Keep Your Packing Materials

Save the shipping box and packing materials in the event the MP8660 should require shipping to a 3M Service
Center for repair. Check the projection lens, it should be fully retracted to prevent damage during shipping.

1-3. What's Next?

After you have unpacked the MP8660 system and identified all the parts, you are ready to set up the projector.
Take a few minutes to review Section 2 to familiarize yourself with the MP8660 machine characteristics and
then turn to Section 3 to set up the projector.
3M 1997

Section 1: Unpack

Remote Control Transmitter
VGA Cable
(15-15 pin M/M) (S-Video mini DIN4-pin)
PS/2 Adaptor Cable
Figure 1-1. Inventory of Shipping Box
The projection lens must be completely retracted to
protect it during shipping. If the AUTO RETRACT
feature has been disabled, the lens will not retract
automatically. Press the ZOOM
FOCUS arrow to retract the lens manually.
3M Multimedia Projector MP8660
Lens Cap
Video Cable Power Cord
(US, Euro, UK)
RCA to Stereo mini
Gender Changer jack
VGA MAC Monitor Adaptor
Note
arrow and
MAC Adaptor
Serial Mouse Cable
Hexagon
Wrench
3