Teleflex TFX160 Operation Manual page 10

USING THE 160
CONTROL FUNCTIONS
C P
ONTROL ANEL
The C
ONTROL
adjust some 160 settings. Push the knob to display
the C P
ONTROL
a feature for adjustment. A light colored
background indicates the selected feature. Turn the
Range knob to adjust the selected feature. Remove
the C
ONTROL
the C
ONTROL
made after a few seconds, the C
removed automatically.
±
R K
ANGE NOB
±
The R
ANGE
ranges used on the display. The
Range± knob has slightly different
capabilities
operation. See Modes of Operation
for specific information. In all cases
turning the knob clockwise increases
the range,
counterclockwise
range. Turning the knob slowly
increases the adjustment in small
increments, while turning it quickly
makes large
adjustment.
THE 160 DISPLAY
The 160 uses a high resolution LCD display to show sonar information,
digital depth, temperature, speed and other readouts.
A digital depth readout ranging from 2 to 600 feet is always displayed in
the upper left corner of the LCD. When the speed/temp accessory is
connected, additional digital readouts are shown below the depth. A
voltage readout appears in the bottom left when the input voltage to the
160 is less than 10 volts or greater than 16 volts.
8
K
NOB
P accesses features used to
ANEL KNOB
list, then rotate the knob to select
ANEL
P list from the display by pushing
ANEL
P knob. If no adjustments are
ANEL
knob adjusts the depth
in each mode
while turning
decreases
changes
P list is
ONTROL ANEL
Depth, Temp and
Speed readouts
of
it
the
to the
Depth Range
Scale
Chart
Window
Real TIme Sonar
Window