Dell Inspiron 8600 Service Manual page 14

Hide thumbs Also See for Inspiron 8600:

Table of Contents

Memory Module, Mini PCI Card, Modem, and Modules: Dell Inspiron 8600 Service Manual

1 securing clips (2 per

connector)

2 memory module

NOTICE:

If you need to install memory modules in two connectors, install a memory module in

the connector labeled "DIMMA (Slot 1)" before you install a module in the connector labeled

"DIMMB."

4. Ground yourself and install the new memory module:

a. Align the notch in the module with the slot in the center of the connector.

b. Slide the edge of the module firmly into the connector, and rotate the module down until

you feel a click. If you do not feel the click, remove the module and reinstall it.

NOTE:

If the memory module is not installed properly, the computer does not boot. The Num

Lock and Scroll Lock lights blink about ten times.

5. Replace the cover and screw.

NOTICE:

If the memory module cover is difficult to close, remove the module and reinstall it.

Forcing the cover to close may damage your computer.

file:///I|/SERVICE%20MANUALS/DELL%20MANUALS...T%20PARALLEL%20SERIAL_SERV_MAN/upgrades.htm (3 of 13)6/21/2004 1:14:15 AM

Table of Contents