Table of Contents
Advertisement
4
If you want to stop the "Memorize Ch." process,
press the MENU button to return to Set-up menu.
Wait 15 seconds, or press DISPLAY button or
5
MENU button to return to normal TV viewing.
Your TV's channel memory will not be affected
by a power outage. You will not need to re-pro-
gram the memory unless you change the type
of cable or antenna connected to your TV.
Changing Channels
1
2
Changing the Volume
1
2
12
You can change channels in three ways:
1 The WCHV buttons will take you through all
memorized channels, one by one. The WCHV
buttons will not access channels that have not
been programmed into the TV's memory. For
3
more information about programming channels
into memory, see the section "Programming your
TV's Channel Memory" on the previous page.
2 The number buttons (0-9) will take you to any
channel, even if it has not been memorized. To
change to a channel, enter its number; the TV
will tune to the new channel when you enter the
second digit of the channel.
3 The PREVIOUS button will take you instantly to
the last channel you were watching.
1 To change the volume of the TV set, use the
CVOLB buttons on the remote controller or on
the front panel.
2 To quickly turn off the sound, press the MUTE
button on the remote. The '
screen. To return the volume to its previous level,
press MUTE again.
h
h
' will appear on
Advertisement
Table of Contents
