Fujitsu LifeBook E Series E8110 Bios Manual page 7

Drive1 Submenu of the Main Menu
The Drive1 submenu allows you to configure secondary ATA devices.
Main
Type:
Multi-Sector Transfers:
LBA Mode Control:
Transfer Mode:
Ultra DMA Mode:
F1 Help
ESC Exit
Table 3: Fields, Options and Defaults for the Drive1 Submenu of the Main Menu
Menu Field Options
■
Type: Auto
■
None
■
Multi-Sector Disabled
Transfers:
■
2 Sectors
■
4 Sectors
■
8 Sectors
■
16 Sectors
■
LBA Mode Disabled
Control:
■
Enabled
PhoenixBIOS Setup Utility
Drive1 [MATSHITADVD-RAM UJ-841S]
[Auto]
[Disabled]
[Disabled]
[Standard]
[Disabled]
Select Item -/Space
Select Menu Enter
Figure 3. Drive1 Submenu
Default
[Auto]
[Disabled]
[Disabled]
M a i n M e n u
Item Specific Help
Select Serial ATA/IDE
drive installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
[None]
The drive is disabled.
Change Values F9
Select Sub-Menu F10
Description
NOTE: The Type field does not appear as a drop-down menu. Tap
the spacebar to toggle the selections.
Selects the ATA/ATAPI device type. Select Auto to have the type
automatically identified by the BIOS at POST. If None is selected, all
of the following setup items do not appear.
This option cannot be changed (automatically identified by the
BIOS). Specifies the number of sectors per block for multiple sector
transfer.
Enables or disables Logical Block Addressing in place of Cylinder,
Head, Sector addressing. This option cannot be changed (automati-
cally identified by the BIOS).
Setup Defaults
Save and Exit
7