Hard Disk Security Submenu Of The Security Menu - Fujitsu LifeBook E Series E8110 Bios Manual

L i f e B o o k E S e r i e s B I O S

Hard Disk Security Submenu of the Security Menu

The Hard Disk Security submenu is for configuring hard disk security features.
Drive0:
Drive1:
Password Entry on Boot:
F1
ESC
Table 14: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu
Menu Field Options
Drive0: ___
Set Master
___
Password
Set User Password ___
Drive1: ___
Set Master ___
Password:
22
PhoenixBIOS Setup Utility
Main Advanced Security
Hard Disk Security
Set Master Password
Set User Password
Set Master Password
Set User Password
Help Select Item
Exit Select Menu
Figure 14. Hard Disk Security Submenu
Default Description
Clear Display-only. Default is Clear. When the Drive0 Password has been set, the field
changes to Set. When this password is set, the primary hard disk drive cannot be
used in another system unless the password is entered.
[Enter] Sets, changes or cancels the Drive0 Master Password. The Drive0 Master Password
may be up to seven characters long and must include only letters or numbers (no
symbols). Passwords are NOT case-sensitive. When a Drive0 Master Password is set,
it must be used to access the hard drive if it is used in another system. Note that the
password will not take effect until the system has been rebooted.
[Enter] Sets, changes or cancels the Drive0 User Password. The Drive0 User Password may
be up to seven characters long and must include only letters or numbers (no sym-
bols). Passwords are NOT case-sensitive. When a Drive0 User Password is set, it
must be used to access the modular hard drive if it is used in another system. Note
that the password will not take effect until the system has been rebooted.
Not Display-only. Default is Not Available. When Drive1 Password has been set, the field
Available changes to Set. When this password is set, the secondary (modular) hard disk drive
cannot be used in another system unless the password is entered.
[Enter] Sets, changes or cancels the Drive1 Master Password. The Drive1 Master Password
may be up to seven characters long and must include only letters or numbers (no
symbols). Passwords are NOT case-sensitive. When a Drive1Master Password is set,
it must be used to access the hard drive if it is used in another system. Note that the
password will not take effect until the system has been rebooted.
Power Savings
Clear
[Enter]
[Enter]
Not Available
[Enter]
[Enter]
[Enabled]
-/Space Change Values
Enter Select Sub-Menu
Exit
Item Specific Help
Press <Enter> key to
Set User Hard Disk
Password. The hard disk
is locked with the
password. Data in the
locked disk cannot be
read on other systems.
F9 Setup Defaults
F10 Save and Exit