Display - Honda 2011 Fit Manual

System Setup

Display

There are two screen display modes:
Day Mode Night Mode
Day and Night. The recommended
setting is Auto, which automatically
switches the screen between Day and
Night modes as you turn the headlights
on or off.
You can select Day or Night mode to
override the Auto mode. This is a
useful feature for drivers that like to use
headlights during the day and want to
temporarily override Night mode.
However, the screen in Day mode will
be extremely bright at night.
74 Navigation System
Display How setting affects
Mode display mode:
Automatically switches
Auto
(factory between Day and Night
default) mode by sensing if the
headlights are on.
Stays in Day mode.
Day
Stays in Night mode.
Night
Displays the clock on
Clock
the screen.
To override setting But remember:
while driving:
Adjust the dash
Override night display:
Adjust dash brightness brightness (with
(with headlights on) to headlights on) back to
full bright. normal to allow auto
switching by sensing
Override day display:
Turn on headlights and headlights.
ensure the dash
brightness is not at full
bright.
Push and hold the There is no auto Night/
joystick for 10 seconds Day mode change with
(switches to Night the headlights on/off.
mode). You control the setting.
Push and hold the There is no auto Night/
joystick for 10 seconds Day mode change with
(switches to Day mode). the headlights on/off.
You control the setting.
To return to the previous Touch any button to
screen, press the NAVI return to your last
BACK button. screen.