Asus L8400 Service Manual page 18

B O T T O M
C A S E
M O D U L E
S I D E C O V E R
M O D U L E
R E M O V A L
C D - R O M
M O D U L E
R E M O V A L
L E D B O A R D
R E M O V A L
D I S A S S E M B L Y P R O C E D U R E
Bottom Case Module
The illustrations below show how to disassemble and remove the bottom case module
of the notebook. The module contains the bottom case itself, LED board, CD-ROM,
speaks, side cover and charger board.
Removing Side Cover Module
1. Lift up the side cover module away from bottom case.
3. Disconnect the speaker cable.
Removing CD-ROM Module
1. Remove 1 screw to separate the CD-ROM from motherboard (no.1, M2*6L(K)B-
NI).
2. Hold the FDD/CD/HDD board and follow the arrow direction below to slide
out the CD-ROM module and disconnect from the FDD/CD/HDD board.
3. Lift the CD-ROM module away from motherboard.
Removing LED Board
1. Remove 2 screws (no.1, M2*3L(k) W-NI).
2. Remove LED bracket from the FDD bracket.
3. Remove the LED board cable (no.2)
4. Remove LED board (no.3) from the bottom case.
No.1
3 - 18 3 - 18