Fujitsu LifeBook A6110 User Manual page 99

Problem
The Built-in Display does
not close.
The Built-in Display has
bright or dark spots.
The application display
uses only a portion of your
screen and is surrounded
by a dark frame.
The Display is dark when
on battery power.
You have connected an
external monitor and it does
not display any information.
Possible Cause Possible Solutions
A foreign object, such Remove all foreign objects from the keyboard.
as a paper clip, is stuck
between the display and
keyboard.
If the spots are very tiny This is normal; do nothing.
and few in number, this
is normal for a large
LCD display.
If the spots are numer- Display is faulty; contact your support representative.
ous or large enough to
interfere with your oper-
ation needs.
You are running an Display compression gives a clearer but smaller display for appli-
application that does cations that do not support 800 x 600/1024 x 768 pixel resolution.
not support 800 x You can fill the screen but have less resolution by changing dis-
600/1024 x 768 pixel play compression settings, (See Video Features submenu located
resolution display and within the Advanced menu of the BIOS. See "BIOS Setup Utility"
display compression is on page 45.
enabled.
The Power Manage- Press [Fn] + [F7] to increase brightness or double-click on the bat-
ment utility default is set tery gauge and adjust Power Control under battery settings.
on low brightness to
conserve power.
Your BIOS setup is not Toggle the video destination by pressing [Fn]+ [F10] together, or
set to enable your exter- check your BIOS setup and enable your external monitor. (See the
nal monitor. Video Features submenu, located within the Advanced Menu of
the BIOS. See "BIOS Setup Utility" on page 45.
Your external monitor is Reinstall your device. See "External Video Port" on page 79.
not properly installed.
94 - Troubleshooting